If you use the --help option, it will give you the codes for each sensor. -tk
On Mon, Oct 24, 2016 at 12:01 PM, Jacek Skowroński <[email protected]> wrote: > Hi guys. > From about 2 years I'm using weewx - thanks for good sw - good job. > From 6months I'm using Davis Vantage pro2 (6153). Today I had bought > external module - Davis 6435 for leaf wet and soil data (temperature and > moisure). > I know that I had to add new ID to get it visible in the Davis console. > I've found that info in documentation: > > Action --set-transmitter-type > > If you have additional sensors for your Vantage station, you can configure > them using your console. However, if you have a Davis Weather Envoy > receiver > <http://www.davisnet.com/weather/products/weather_product.asp?pnum=06316>, > it will not have a console! As an alternative, wee_device can do this > using the command --set-transmitter-type. > > For example, to add an extra temperature sensor to channel 3, do the > following: > > wee_device --set-transmitter-type=3,1,2 > > This says to turn on channel 3, set its type to 1 ("Temperature only"), > and have it show up in the database as extraTemp2. Here's another > example, this time for a combined temperature / humidity sensor: > > wee_device --set-transmitter-type=5,3,2,4 > > This will add the combined sensor to channel 5, set its type to 3 > ("Temperature and humidity"), and it will show up in the database as > extraTemp2 and extraHumid4. > > The --help option will give you the code for each sensor type. > > > so there are 2 main questions: > > 1. Where can I find full specification on external module types? > > 2. Is here anybody that had already configured weewx with Davis Vantage > pro2 with 6345 module? How to add soli temperature on the ground? How to > add soil temp/humidity on the -30cm level. How to add leaf wet data to > weewx and also send it to the wu? > > > Thanks for help > > Regards > > Jacek > > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
