thanks Tom, other issue is - where can I find or setup which sensor data can be sent to the WU?
On Monday, October 24, 2016 at 9:45:14 PM UTC+2, Tom Keffer wrote: > > If you use the --help option, it will give you the codes for each sensor. > > -tk > > On Mon, Oct 24, 2016 at 12:01 PM, Jacek Skowroński <[email protected] > <javascript:>> wrote: > >> Hi guys. >> From about 2 years I'm using weewx - thanks for good sw - good job. >> From 6months I'm using Davis Vantage pro2 (6153). Today I had bought >> external module - Davis 6435 for leaf wet and soil data (temperature and >> moisure). >> I know that I had to add new ID to get it visible in the Davis console. >> I've found that info in documentation: >> >> Action --set-transmitter-type >> >> If you have additional sensors for your Vantage station, you can >> configure them using your console. However, if you have a Davis Weather >> Envoy receiver >> <http://www.davisnet.com/weather/products/weather_product.asp?pnum=06316>, >> it will not have a console! As an alternative, wee_device can do this >> using the command --set-transmitter-type. >> >> For example, to add an extra temperature sensor to channel 3, do the >> following: >> >> wee_device --set-transmitter-type=3,1,2 >> >> This says to turn on channel 3, set its type to 1 ("Temperature only"), >> and have it show up in the database as extraTemp2. Here's another >> example, this time for a combined temperature / humidity sensor: >> >> wee_device --set-transmitter-type=5,3,2,4 >> >> This will add the combined sensor to channel 5, set its type to 3 >> ("Temperature and humidity"), and it will show up in the database as >> extraTemp2 and extraHumid4. >> >> The --help option will give you the code for each sensor type. >> >> >> so there are 2 main questions: >> >> 1. Where can I find full specification on external module types? >> >> 2. Is here anybody that had already configured weewx with Davis Vantage >> pro2 with 6345 module? How to add soli temperature on the ground? How to >> add soil temp/humidity on the -30cm level. How to add leaf wet data to >> weewx and also send it to the wu? >> >> >> Thanks for help >> >> Regards >> >> Jacek >> >> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected] <javascript:>. >> For more options, visit https://groups.google.com/d/optout. >> > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
