pi@raspberrypi:~ $ wee_device --info
Using configuration file /etc/weewx/weewx.conf
Using Vantage driver version 3.0.7 (weewx.drivers.vantage)
Querying...
Davis Vantage EEPROM settings:

    CONSOLE TYPE:                   VantagePro2

    CONSOLE FIRMWARE:
      Date:                         Jun  3 2013
      Version:                      3.15

    CONSOLE SETTINGS:
      Archive interval:             300 (seconds)
      Altitude:                     223 (meter)
      Wind cup type:                large
      Rain bucket type:             0.2 MM
      Rain year start:              1
      Onboard time:                 2016-10-29 21:50:33

    CONSOLE DISPLAY UNITS:
      Barometer:                    hPa
      Temperature:                  degree_10C
      Rain:                         mm
      Wind:                         km_per_hour

    CONSOLE STATION INFO:
      Latitude (onboard):           +50.9
      Longitude (onboard):          +16.5
      Use manual or auto DST?       AUTO
      DST setting:                  N/A
      Use GMT offset or zone code?  ZONE_CODE
      Time zone code:               22
      GMT offset:                   N/A

    TRANSMITTERS:
      Channel 1:                    iss
      Channel 2:                    leaf_soil
      Channel 3:                    (N/A)
      Channel 4:                    (N/A)
      Channel 5:                    (N/A)
      Channel 6:                    (N/A)
      Channel 7:                    (N/A)
      Channel 8:                    (N/A)

    RECEPTION STATS:
      Total packets received:       232
      Total packets missed:         8
      Number of resynchronizations: 0
      Longest good stretch:         41
      Number of CRC errors:         0

    BAROMETER CALIBRATION DATA:
      Current barometer reading:    30.311 inHg
      Altitude:                     732 feet
      Dew point:                    40 F
      Virtual temperature:          49 F
      Humidity correction factor:   17
      Correction ratio:             1.027
      Correction constant:          +0.000 inHg
      Gain:                         0.000
      Offset:                       -53.000

    OFFSETS:
      Wind direction:               +0 deg
      Inside Temperature:           +0.0 F
      Inside Humidity:              +0%
      Outside Temperature:          +0.0 F
      Outside Humidity:             +0%
      Soil Temperature 1:           +0.0 F
      Soil Temperature 2:           +0.0 F
      Soil Temperature 3:           +0.0 F
      Soil Temperature 4:           +0.0 F
      Leaf Temperature 1:           +0.0 F
      Leaf Temperature 2:           +0.0 F
      Leaf Temperature 3:           +0.0 F
      Leaf Temperature 4:           +0.0 F


On Saturday, October 29, 2016 at 9:49:27 PM UTC+2, Jacek Skowroński wrote:
>
> Hi,
> I have Davis Vatange pro2 with external leaf_soil module located on ID=2.
> So according to help I did such an command
>
> wee_device --set-transmitter-type=2,8,1,1
>
>
> So if I understood it correctly I would have temperature and humidity of 
> soil on the external temp1 and external hum1.
> How to get those data to WU?
>
> Just now on my station we do not see temp and humidity of the soil.
>
> https://www.wunderground.com/personal-weather-station/dashboard?ID=IWOJEWDZ56
>
> Next topic is best timings for sending data, is it possible to get data in 
> RealTime?
> In general Davis has archival for 5min (300sec) so it sends data every 
> 5minute.
> I had tried rapid fire, but it sends data every 2.5 sec but data changes 
> every 5minute so it's a little bit crazy.
>
> Is there anybody using Davis Vantage pro2 and WU and could share your 
> config?
>
> Thanks in advance
> BR
> Jacek 
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
For more options, visit https://groups.google.com/d/optout.

Reply via email to