On Sat, Oct 29, 2016 at 12:49 PM, Jacek Skowroński <[email protected]> wrote:
> Hi, > I have Davis Vatange pro2 with external leaf_soil module located on ID=2. > So according to help I did such an command > > wee_device --set-transmitter-type=2,8,1,1 > > > So if I understood it correctly I would have temperature and humidity of > soil on the external temp1 and external hum1. > The temperature would show up as soilTemp1, and the humidity as soilMoist1. You can check this by running weewx directly <http://weewx.com/docs/usersguide.htm#Running_directly>. Make sure that the values soilTemp1 and soilMoist1 look reasonable for both the LOOP and REC values. > How to get those data to WU? > > Just now on my station we do not see temp and humidity of the soil. > https://www.wunderground.com/personal-weather-station/ > dashboard?ID=IWOJEWDZ56 > If you have values for soilTemp1 and soilMoist1, weewx should be sending them to the WU. But, let's first make sure you have values. > Next topic is best timings for sending data, is it possible to get data in > RealTime? > In general Davis has archival for 5min (300sec) so it sends data every > 5minute. > I had tried rapid fire, but it sends data every 2.5 sec but data changes > every 5minute so it's a little bit crazy. > Both soilTemp1 and soilMoist1 are included in Davis LOOP packets, so they should be realtime. However, I don't know that the WU will display realtime soil temperature and moisture. -tk -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
