I do not know - I do not possess a Davis station - I just read the Davis manual and see there are three modes for the soil-leaf console. You should read the whole Davis manual and make sure you are using it correctly and have it connected to the probe correctly!!
On Monday, 31 October 2016 09:50:16 UTC+2, Jacek Skowroński wrote: > not yet. > Could I do this remotly via ssh to the raspberry pi? Or do I have to > manually click on the console? > The problem is I'm away from the place the Davis is located, I would be > there next Saturday. > > On Monday, October 31, 2016 at 8:06:03 AM UTC+1, Andrew Milner wrote: >> >> Have you tried configuring it as soil only and not leaf-soil since you >> say you do not have any leaf sensors? >> >> >> http://www.davisnet.com/product_documents/weather/manuals/VP2_Manual_Leaf_Soil_Temp_RevA.pdf >> >> >> >> On Monday, 31 October 2016 08:50:03 UTC+2, Jacek Skowroński wrote: >> >>> I have soil_leaf module (ID=2), temp proble is the only one attached to >>> the module and it is in slot 1. >>> >>> The console is configured to get data from ID=2 and module is set to the >>> leaf_soil. >>> >>> >>> That is all on the physical side. >>> >>> When I press temp button on the console I see temp with no1. >>> >>> Goig back to the issue, I'd like to have this value in the net so would >>> be best to have it in the WU. >>> Thanks for help >>> >>> regards >>> Jacek >>> >>> W dniu 2016-10-31 o 07:43, Andrew Milner pisze: >>> >>> have you checked the soil temperature probe is in the correct slot? It >>> appears to be being read as a leaf temperature probe and not a soil >>> temperature probe. >>> >>> On Monday, 31 October 2016 08:31:06 UTC+2, Jacek Skowroński wrote: >>>> >>>> Yes i have only sensor for temperature >>>> I have No humidity sensor now >>>> Can we somohow force wu to see this data? >>>> >>>> Nowhere i told i have other sensors >>>> >>>> W dniu poniedziałek, 31 października 2016 Thomas Keffer < >>>> [email protected]> napisał(a): >>>> >>>>> Hello, Jacek, >>>>> >>>>> You said you have soil temperature and humidity sensors, but it >>>>> appears that you actually have soil and *leaf temperature* sensors. >>>>> That is, you have values for soilTemp1 and leafTemp1, but nothing for >>>>> soilMoist1. >>>>> >>>>> Or, perhaps the sensors are plugged into the wrong probe slot? You >>>>> should check. >>>>> >>>>> The WeatherUnderground PWS protocol >>>>> <http://wiki.wunderground.com/index.php/PWS_-_Upload_Protocol> does >>>>> not recognize leaf temperature, so that would explainwhy you are not >>>>> seeing >>>>> anything. >>>>> >>>>> -tk >>>>> >>>>> On Sun, Oct 30, 2016 at 9:36 AM, Jacek Skowroński <[email protected]> >>>>> wrote: >>>>> >>>>>> some logs >>>>>> REC: 2016-10-30 17:30:00 CET (1477845000) altimeter: >>>>>> 30.2914897657, appTemp: 42.5550178172, barometer: 30.332, cloudbase: >>>>>> 2354.14897393, consBatteryVoltage: 1.68, dateTime: 1477845000, dewpoint: >>>>>> 38.9625445147, ET: 0.0, extraHumid1: None, extraHumid2: None, >>>>>> extraTemp1: >>>>>> None, extraTemp2: None, extraTemp3: None, forecastRule: 1, heatindex: >>>>>> 46.1, >>>>>> highOutTemp: 46.1, highRadiation: None, highUV: None, humidex: 46.1, >>>>>> inDewpoint: 54.6182787763, inHumidity: 49.0, inTemp: 75.1, interval: 5, >>>>>> leafTemp1: 45.0, leafTemp2: None, leafWet1: None, leafWet2: None, >>>>>> lowOutTemp: 46.0, maxSolarRad: None, outHumidity: 76.0, outTemp: 46.1, >>>>>> pressure: 29.5091101841, radiation: None, rain: 0.0, rainRate: 0.0, >>>>>> rxCheckPercent: 97.375, soilMoist1: None, soilMoist2: None, soilMoist3: >>>>>> None, soilMoist4: None, soilTemp1: 45.0, soilTemp2: None, soilTemp3: >>>>>> None, >>>>>> soilTemp4: None, txBatteryStatus: 0, usUnits: 1, UV: None, windchill: >>>>>> 46.1, >>>>>> windDir: 22.5, windGust: 4.0, windGustDir: 22.5, windrun: 54.5833333333, >>>>>> windSpeed: 2.0 >>>>>> LOOP: 2016-10-30 17:30:16 CET (1477845016) altimeter: >>>>>> 30.2924734796, appTemp: 42.4369596271, barometer: 30.333, cloudbase: >>>>>> 2353.42091128, consBatteryVoltage: 1.68, dateTime: 1477845016, dayET: >>>>>> 0.0, >>>>>> dayRain: 0.0, dewpoint: 38.8657479904, extraAlarm1: 0, extraAlarm2: 0, >>>>>> extraAlarm3: 0, extraAlarm4: 0, extraAlarm5: 0, extraAlarm6: 0, >>>>>> extraAlarm7: 0, extraAlarm8: 0, extraHumid1: None, extraHumid2: None, >>>>>> extraHumid3: None, extraHumid4: None, extraHumid5: None, extraHumid6: >>>>>> None, >>>>>> extraHumid7: None, extraTemp1: None, extraTemp2: None, extraTemp3: None, >>>>>> extraTemp4: None, extraTemp5: None, extraTemp6: None, extraTemp7: None, >>>>>> forecastIcon: 8, forecastRule: 1, heatindex: 46.0, humidex: 46.0, >>>>>> inDewpoint: 54.6182787763, inHumidity: 49.0, insideAlarm: 0, inTemp: >>>>>> 75.1, >>>>>> leafTemp1: 45.0, leafTemp2: None, leafTemp3: None, leafTemp4: None, >>>>>> leafWet1: None, leafWet2: None, leafWet3: None, leafWet4: 0.0, >>>>>> maxSolarRad: >>>>>> None, monthET: 0.0, monthRain: 2.960629922, outHumidity: 76.0, >>>>>> outsideAlarm1: 0, outsideAlarm2: 0, outTemp: 46.0, pressure: >>>>>> 29.5100730398, >>>>>> radiation: None, rain: 0.0, rainAlarm: 0, rainRate: 0.0, soilLeafAlarm1: >>>>>> 0, >>>>>> soilLeafAlarm2: 0, soilLeafAlarm3: 0, soilLeafAlarm4: 0, soilMoist1: >>>>>> None, >>>>>> soilMoist2: None, soilMoist3: None, soilMoist4: None, soilTemp1: 45.0, >>>>>> soilTemp2: None, soilTemp3: None, soilTemp4: None, stormRain: 0.0, >>>>>> stormStart: None, sunrise: 1477802580, sunset: 1477837860, >>>>>> txBatteryStatus: >>>>>> 0, usUnits: 1, UV: None, windchill: 46.0, windDir: 32.0, windGust: 2.0, >>>>>> windGustDir: 32.0, windSpeed: 2.0, windSpeed10: 2.0, yearET: 0.0, >>>>>> yearRain: >>>>>> 12.000000003 >>>>>> >>>>>> so both loop and rec have soilTemp1 value of 45.0. >>>>>> >>>>>> and here other log >>>>>> pi@raspberrypi:~ $ tail -f /var/log/syslog >>>>>> Oct 30 17:31:33 raspberrypi weewx[10216]: engine: Starting up weewx >>>>>> version 3.5.0 >>>>>> Oct 30 17:31:33 raspberrypi weewx[10216]: vantage: gentle wake up of >>>>>> console successful >>>>>> Oct 30 17:31:33 raspberrypi weewx[10216]: engine: Clock error is 2.61 >>>>>> seconds (positive is fast) >>>>>> Oct 30 17:31:33 raspberrypi weewx[10216]: vantage: Getting archive >>>>>> packets since 2016-10-30 17:30:00 CET (1477845000) >>>>>> Oct 30 17:31:33 raspberrypi weewx[10216]: vantage: gentle wake up of >>>>>> console successful >>>>>> Oct 30 17:31:33 raspberrypi weewx[10216]: vantage: Retrieving 0 >>>>>> page(s); starting index= 0 >>>>>> Oct 30 17:31:33 raspberrypi weewx[10216]: engine: Starting main >>>>>> packet loop. >>>>>> Oct 30 17:31:33 raspberrypi weewx[10216]: vantage: gentle wake up of >>>>>> console successful >>>>>> Oct 30 17:31:33 raspberrypi weewx[10216]: vantage: Requesting 200 >>>>>> LOOP packets. >>>>>> Oct 30 17:31:33 raspberrypi weewx[10216]: vantage: gentle wake up of >>>>>> console successful >>>>>> Oct 30 17:35:15 raspberrypi weewx[10216]: vantage: Getting archive >>>>>> packets since 2016-10-30 17:30:00 CET (1477845000) >>>>>> Oct 30 17:35:15 raspberrypi rsyslogd-2007: action 'action 17' >>>>>> suspended, next retry is Sun Oct 30 17:36:45 2016 [try >>>>>> http://www.rsyslog.com/e/2007 ] >>>>>> Oct 30 17:35:15 raspberrypi weewx[10216]: vantage: gentle wake up of >>>>>> console successful >>>>>> Oct 30 17:35:15 raspberrypi weewx[10216]: vantage: Retrieving 1 >>>>>> page(s); starting index= 3 >>>>>> Oct 30 17:35:16 raspberrypi weewx[10216]: manager: added record >>>>>> 2016-10-30 17:35:00 CET (1477845300) to database 'weewx.sdb' >>>>>> Oct 30 17:35:16 raspberrypi weewx[10216]: manager: added record >>>>>> 2016-10-30 17:35:00 CET (1477845300) to daily summary in 'weewx.sdb' >>>>>> Oct 30 17:35:16 raspberrypi weewx[10216]: vantage: DMPAFT complete: >>>>>> page timestamp 2016-10-21 21:10:00 CEST (1477077000) less than final >>>>>> timestamp 2016-10-30 17:35:00 CET (1477845300) >>>>>> Oct 30 17:35:16 raspberrypi weewx[10216]: vantage: Catch up complete. >>>>>> Oct 30 17:35:16 raspberrypi weewx[10216]: reportengine: Running >>>>>> reports for latest time in the database. >>>>>> Oct 30 17:35:16 raspberrypi weewx[10216]: vantage: Requesting 200 >>>>>> LOOP packets. >>>>>> Oct 30 17:35:16 raspberrypi weewx[10216]: reportengine: Running >>>>>> report StandardReport >>>>>> Oct 30 17:35:16 raspberrypi weewx[10216]: reportengine: Found >>>>>> configuration file /etc/weewx/skins/Standard/skin.conf for report >>>>>> StandardReport >>>>>> Oct 30 17:35:16 raspberrypi weewx[10216]: vantage: gentle wake up of >>>>>> console successful >>>>>> Oct 30 17:35:17 raspberrypi weewx[10216]: restx: Wunderground-PWS: >>>>>> Published record 2016-10-30 17:35:00 CET (1477845300) >>>>>> Oct 30 17:35:19 raspberrypi weewx[10216]: cheetahgenerator: Generated >>>>>> 14 files for report StandardReport in 3.61 seconds >>>>>> Oct 30 17:35:20 raspberrypi weewx[10216]: genimages: Generated 12 >>>>>> images for StandardReport in 0.63 seconds >>>>>> Oct 30 17:35:20 raspberrypi weewx[10216]: reportengine: copied 9 >>>>>> files to /var/www/weewx >>>>>> Oct 30 17:35:20 raspberrypi weewx[10216]: reportengine: Running >>>>>> report FTP >>>>>> Oct 30 17:35:20 raspberrypi weewx[10216]: reportengine: Found >>>>>> configuration file /etc/weewx/skins/Ftp/skin.conf for report FTP >>>>>> Oct 30 17:35:20 raspberrypi weewx[10216]: reportengine: FTP upload >>>>>> not requested. Skipped. >>>>>> Oct 30 17:35:20 raspberrypi weewx[10216]: reportengine: Running >>>>>> report RSYNC >>>>>> Oct 30 17:35:20 raspberrypi weewx[10216]: reportengine: Found >>>>>> configuration file /etc/weewx/skins/Rsync/skin.conf for report RSYNC >>>>>> Oct 30 17:35:20 raspberrypi weewx[10216]: reportengine: rsync upload >>>>>> not requested. Skipped. >>>>>> >>>>>> so any hint what is wrong that WU does not get soil temp? >>>>>> >>>>>> https://www.wunderground.com/personal-weather-station/dashboard?ID=IWOJEWDZ56#history >>>>>> >>>>>> there is only C sign >>>>>> >>>>>> On Sunday, October 30, 2016 at 4:52:01 PM UTC+1, Jacek Skowroński >>>>>> wrote: >>>>>>> >>>>>>> I'm transferring both modes, >>>>>>> I had stopped weewx and run weewd so from its output I know taht >>>>>>> there is soiltemp1 and has value 46. other has none. >>>>>>> I did for fe minutes and output was similiar. >>>>>>> Is it debug? Or it's something different? >>>>>>> >>>>>>> On Sunday, October 30, 2016 at 10:21:19 AM UTC+1, Andrew Milner >>>>>>> wrote: >>>>>>>> >>>>>>>> Tom expressed doubts as to whether WU displayed soil temps on rapid >>>>>>>> fire - and you appear to be using rapid fire. Have you tried >>>>>>>> uploading >>>>>>>> normal archive records instead of rapid firing?? >>>>>>>> >>>>>>>> Did you run with debug set, as Tom suggested, and confirm that the >>>>>>>> REC and LOOP contain the soil temperature?? >>>>>>>> >>>>>>>> >>>>>>>> On Sunday, 30 October 2016 10:02:55 UTC+2, Jacek Skowroński wrote: >>>>>>>> >>>>>>>>> I had changed the probe slot for 1, and now I have >>>>>>>>> soilTemp1: 46.0, >>>>>>>>> >>>>>>>>> but on the WU page something is strange. I get C close to the soil >>>>>>>>> temp, but there is no value. >>>>>>>>> >>>>>>>>> https://www.wunderground.com/personal-weather-station/dashboard?ID=IWOJEWDZ56#history >>>>>>>>> >>>>>>>>> On Saturday, October 29, 2016 at 9:49:27 PM UTC+2, Jacek >>>>>>>>> Skowroński wrote: >>>>>>>>>> >>>>>>>>>> Hi, >>>>>>>>>> I have Davis Vatange pro2 with external leaf_soil module located >>>>>>>>>> on ID=2. >>>>>>>>>> So according to help I did such an command >>>>>>>>>> >>>>>>>>>> wee_device --set-transmitter-type=2,8,1,1 >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> So if I understood it correctly I would have temperature and >>>>>>>>>> humidity of soil on the external temp1 and external hum1. >>>>>>>>>> How to get those data to WU? >>>>>>>>>> >>>>>>>>>> Just now on my station we do not see temp and humidity of the >>>>>>>>>> soil. >>>>>>>>>> >>>>>>>>>> https://www.wunderground.com/personal-weather-station/dashboard?ID=IWOJEWDZ56 >>>>>>>>>> >>>>>>>>>> Next topic is best timings for sending data, is it possible to >>>>>>>>>> get data in RealTime? >>>>>>>>>> In general Davis has archival for 5min (300sec) so it sends data >>>>>>>>>> every 5minute. >>>>>>>>>> I had tried rapid fire, but it sends data every 2.5 sec but data >>>>>>>>>> changes every 5minute so it's a little bit crazy. >>>>>>>>>> >>>>>>>>>> Is there anybody using Davis Vantage pro2 and WU and could share >>>>>>>>>> your config? >>>>>>>>>> >>>>>>>>>> Thanks in advance >>>>>>>>>> BR >>>>>>>>>> Jacek >>>>>>>>>> >>>>>>>>> -- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "weewx-user" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>> send an email to [email protected]. >>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>> >>>>> >>>>> -- >>>>> You received this message because you are subscribed to a topic in the >>>>> Google Groups "weewx-user" group. >>>>> To unsubscribe from this topic, visit >>>>> https://groups.google.com/d/topic/weewx-user/WCi0gdv007g/unsubscribe. >>>>> To unsubscribe from this group and all its topics, send an email to >>>>> [email protected]. >>>>> For more options, visit https://groups.google.com/d/optout. >>>>> >>>> -- >>> You received this message because you are subscribed to a topic in the >>> Google Groups "weewx-user" group. >>> To unsubscribe from this topic, visit >>> https://groups.google.com/d/topic/weewx-user/WCi0gdv007g/unsubscribe. >>> To unsubscribe from this group and all its topics, send an email to >>> [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >>> >>> >>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
