Eh Davis console shows temp correctly The manual was read few times I see here is nobody with practice with davis and weewx
W dniu poniedziałek, 31 października 2016 Andrew Milner < [email protected]> napisał(a): > I do not know - I do not possess a Davis station - I just read the Davis > manual and see there are three modes for the soil-leaf console. You should > read the whole Davis manual and make sure you are using it correctly and > have it connected to the probe correctly!! > > > > On Monday, 31 October 2016 09:50:16 UTC+2, Jacek Skowroński wrote: > >> not yet. >> Could I do this remotly via ssh to the raspberry pi? Or do I have to >> manually click on the console? >> The problem is I'm away from the place the Davis is located, I would be >> there next Saturday. >> >> On Monday, October 31, 2016 at 8:06:03 AM UTC+1, Andrew Milner wrote: >>> >>> Have you tried configuring it as soil only and not leaf-soil since you >>> say you do not have any leaf sensors? >>> >>> http://www.davisnet.com/product_documents/weather/manuals/ >>> VP2_Manual_Leaf_Soil_Temp_RevA.pdf >>> >>> >>> >>> On Monday, 31 October 2016 08:50:03 UTC+2, Jacek Skowroński wrote: >>> >>>> I have soil_leaf module (ID=2), temp proble is the only one attached to >>>> the module and it is in slot 1. >>>> >>>> The console is configured to get data from ID=2 and module is set to >>>> the leaf_soil. >>>> >>>> >>>> That is all on the physical side. >>>> >>>> When I press temp button on the console I see temp with no1. >>>> >>>> Goig back to the issue, I'd like to have this value in the net so would >>>> be best to have it in the WU. >>>> Thanks for help >>>> >>>> regards >>>> Jacek >>>> >>>> W dniu 2016-10-31 o 07:43, Andrew Milner pisze: >>>> >>>> have you checked the soil temperature probe is in the correct slot? It >>>> appears to be being read as a leaf temperature probe and not a soil >>>> temperature probe. >>>> >>>> On Monday, 31 October 2016 08:31:06 UTC+2, Jacek Skowroński wrote: >>>>> >>>>> Yes i have only sensor for temperature >>>>> I have No humidity sensor now >>>>> Can we somohow force wu to see this data? >>>>> >>>>> Nowhere i told i have other sensors >>>>> >>>>> W dniu poniedziałek, 31 października 2016 Thomas Keffer < >>>>> [email protected]> napisał(a): >>>>> >>>>>> Hello, Jacek, >>>>>> >>>>>> You said you have soil temperature and humidity sensors, but it >>>>>> appears that you actually have soil and *leaf temperature* sensors. >>>>>> That is, you have values for soilTemp1 and leafTemp1, but nothing >>>>>> for soilMoist1. >>>>>> >>>>>> Or, perhaps the sensors are plugged into the wrong probe slot? You >>>>>> should check. >>>>>> >>>>>> The WeatherUnderground PWS protocol >>>>>> <http://wiki.wunderground.com/index.php/PWS_-_Upload_Protocol> does >>>>>> not recognize leaf temperature, so that would explainwhy you are not >>>>>> seeing >>>>>> anything. >>>>>> >>>>>> -tk >>>>>> >>>>>> On Sun, Oct 30, 2016 at 9:36 AM, Jacek Skowroński <[email protected]> >>>>>> wrote: >>>>>> >>>>>>> some logs >>>>>>> REC: 2016-10-30 17:30:00 CET (1477845000) altimeter: >>>>>>> 30.2914897657, appTemp: 42.5550178172, barometer: 30.332, cloudbase: >>>>>>> 2354.14897393, consBatteryVoltage: 1.68, dateTime: 1477845000, dewpoint: >>>>>>> 38.9625445147, ET: 0.0, extraHumid1: None, extraHumid2: None, >>>>>>> extraTemp1: >>>>>>> None, extraTemp2: None, extraTemp3: None, forecastRule: 1, heatindex: >>>>>>> 46.1, >>>>>>> highOutTemp: 46.1, highRadiation: None, highUV: None, humidex: 46.1, >>>>>>> inDewpoint: 54.6182787763, inHumidity: 49.0, inTemp: 75.1, interval: 5, >>>>>>> leafTemp1: 45.0, leafTemp2: None, leafWet1: None, leafWet2: None, >>>>>>> lowOutTemp: 46.0, maxSolarRad: None, outHumidity: 76.0, outTemp: 46.1, >>>>>>> pressure: 29.5091101841, radiation: None, rain: 0.0, rainRate: 0.0, >>>>>>> rxCheckPercent: 97.375, soilMoist1: None, soilMoist2: None, soilMoist3: >>>>>>> None, soilMoist4: None, soilTemp1: 45.0, soilTemp2: None, soilTemp3: >>>>>>> None, >>>>>>> soilTemp4: None, txBatteryStatus: 0, usUnits: 1, UV: None, windchill: >>>>>>> 46.1, >>>>>>> windDir: 22.5, windGust: 4.0, windGustDir: 22.5, windrun: 54.5833333333, >>>>>>> windSpeed: 2.0 >>>>>>> LOOP: 2016-10-30 17:30:16 CET (1477845016) altimeter: >>>>>>> 30.2924734796, appTemp: 42.4369596271, barometer: 30.333, cloudbase: >>>>>>> 2353.42091128, consBatteryVoltage: 1.68, dateTime: 1477845016, dayET: >>>>>>> 0.0, >>>>>>> dayRain: 0.0, dewpoint: 38.8657479904, extraAlarm1: 0, extraAlarm2: 0, >>>>>>> extraAlarm3: 0, extraAlarm4: 0, extraAlarm5: 0, extraAlarm6: 0, >>>>>>> extraAlarm7: 0, extraAlarm8: 0, extraHumid1: None, extraHumid2: None, >>>>>>> extraHumid3: None, extraHumid4: None, extraHumid5: None, extraHumid6: >>>>>>> None, >>>>>>> extraHumid7: None, extraTemp1: None, extraTemp2: None, extraTemp3: None, >>>>>>> extraTemp4: None, extraTemp5: None, extraTemp6: None, extraTemp7: None, >>>>>>> forecastIcon: 8, forecastRule: 1, heatindex: 46.0, humidex: 46.0, >>>>>>> inDewpoint: 54.6182787763, inHumidity: 49.0, insideAlarm: 0, inTemp: >>>>>>> 75.1, >>>>>>> leafTemp1: 45.0, leafTemp2: None, leafTemp3: None, leafTemp4: None, >>>>>>> leafWet1: None, leafWet2: None, leafWet3: None, leafWet4: 0.0, >>>>>>> maxSolarRad: >>>>>>> None, monthET: 0.0, monthRain: 2.960629922, outHumidity: 76.0, >>>>>>> outsideAlarm1: 0, outsideAlarm2: 0, outTemp: 46.0, pressure: >>>>>>> 29.5100730398, >>>>>>> radiation: None, rain: 0.0, rainAlarm: 0, rainRate: 0.0, >>>>>>> soilLeafAlarm1: 0, >>>>>>> soilLeafAlarm2: 0, soilLeafAlarm3: 0, soilLeafAlarm4: 0, soilMoist1: >>>>>>> None, >>>>>>> soilMoist2: None, soilMoist3: None, soilMoist4: None, soilTemp1: 45.0, >>>>>>> soilTemp2: None, soilTemp3: None, soilTemp4: None, stormRain: 0.0, >>>>>>> stormStart: None, sunrise: 1477802580, sunset: 1477837860, >>>>>>> txBatteryStatus: >>>>>>> 0, usUnits: 1, UV: None, windchill: 46.0, windDir: 32.0, windGust: 2.0, >>>>>>> windGustDir: 32.0, windSpeed: 2.0, windSpeed10: 2.0, yearET: 0.0, >>>>>>> yearRain: >>>>>>> 12.000000003 >>>>>>> >>>>>>> so both loop and rec have soilTemp1 value of 45.0. >>>>>>> >>>>>>> and here other log >>>>>>> pi@raspberrypi:~ $ tail -f /var/log/syslog >>>>>>> Oct 30 17:31:33 raspberrypi weewx[10216]: engine: Starting up weewx >>>>>>> version 3.5.0 >>>>>>> Oct 30 17:31:33 raspberrypi weewx[10216]: vantage: gentle wake up of >>>>>>> console successful >>>>>>> Oct 30 17:31:33 raspberrypi weewx[10216]: engine: Clock error is >>>>>>> 2.61 seconds (positive is fast) >>>>>>> Oct 30 17:31:33 raspberrypi weewx[10216]: vantage: Getting archive >>>>>>> packets since 2016-10-30 17:30:00 CET (1477845000) >>>>>>> Oct 30 17:31:33 raspberrypi weewx[10216]: vantage: gentle wake up of >>>>>>> console successful >>>>>>> Oct 30 17:31:33 raspberrypi weewx[10216]: vantage: Retrieving 0 >>>>>>> page(s); starting index= 0 >>>>>>> Oct 30 17:31:33 raspberrypi weewx[10216]: engine: Starting main >>>>>>> packet loop. >>>>>>> Oct 30 17:31:33 raspberrypi weewx[10216]: vantage: gentle wake up of >>>>>>> console successful >>>>>>> Oct 30 17:31:33 raspberrypi weewx[10216]: vantage: Requesting 200 >>>>>>> LOOP packets. >>>>>>> Oct 30 17:31:33 raspberrypi weewx[10216]: vantage: gentle wake up of >>>>>>> console successful >>>>>>> Oct 30 17:35:15 raspberrypi weewx[10216]: vantage: Getting archive >>>>>>> packets since 2016-10-30 17:30:00 CET (1477845000) >>>>>>> Oct 30 17:35:15 raspberrypi rsyslogd-2007: action 'action 17' >>>>>>> suspended, next retry is Sun Oct 30 17:36:45 2016 [try >>>>>>> http://www.rsyslog.com/e/2007 ] >>>>>>> Oct 30 17:35:15 raspberrypi weewx[10216]: vantage: gentle wake up of >>>>>>> console successful >>>>>>> Oct 30 17:35:15 raspberrypi weewx[10216]: vantage: Retrieving 1 >>>>>>> page(s); starting index= 3 >>>>>>> Oct 30 17:35:16 raspberrypi weewx[10216]: manager: added record >>>>>>> 2016-10-30 17:35:00 CET (1477845300) to database 'weewx.sdb' >>>>>>> Oct 30 17:35:16 raspberrypi weewx[10216]: manager: added record >>>>>>> 2016-10-30 17:35:00 CET (1477845300) to daily summary in 'weewx.sdb' >>>>>>> Oct 30 17:35:16 raspberrypi weewx[10216]: vantage: DMPAFT complete: >>>>>>> page timestamp 2016-10-21 21:10:00 CEST (1477077000) less than final >>>>>>> timestamp 2016-10-30 17:35:00 CET (1477845300) >>>>>>> Oct 30 17:35:16 raspberrypi weewx[10216]: vantage: Catch up complete. >>>>>>> Oct 30 17:35:16 raspberrypi weewx[10216]: reportengine: Running >>>>>>> reports for latest time in the database. >>>>>>> Oct 30 17:35:16 raspberrypi weewx[10216]: vantage: Requesting 200 >>>>>>> LOOP packets. >>>>>>> Oct 30 17:35:16 raspberrypi weewx[10216]: reportengine: Running >>>>>>> report StandardReport >>>>>>> Oct 30 17:35:16 raspberrypi weewx[10216]: reportengine: Found >>>>>>> configuration file /etc/weewx/skins/Standard/skin.conf for report >>>>>>> StandardReport >>>>>>> Oct 30 17:35:16 raspberrypi weewx[10216]: vantage: gentle wake up of >>>>>>> console successful >>>>>>> Oct 30 17:35:17 raspberrypi weewx[10216]: restx: Wunderground-PWS: >>>>>>> Published record 2016-10-30 17:35:00 CET (1477845300) >>>>>>> Oct 30 17:35:19 raspberrypi weewx[10216]: cheetahgenerator: >>>>>>> Generated 14 files for report StandardReport in 3.61 seconds >>>>>>> Oct 30 17:35:20 raspberrypi weewx[10216]: genimages: Generated 12 >>>>>>> images for StandardReport in 0.63 seconds >>>>>>> Oct 30 17:35:20 raspberrypi weewx[10216]: reportengine: copied 9 >>>>>>> files to /var/www/weewx >>>>>>> Oct 30 17:35:20 raspberrypi weewx[10216]: reportengine: Running >>>>>>> report FTP >>>>>>> Oct 30 17:35:20 raspberrypi weewx[10216]: reportengine: Found >>>>>>> configuration file /etc/weewx/skins/Ftp/skin.conf for report FTP >>>>>>> Oct 30 17:35:20 raspberrypi weewx[10216]: reportengine: FTP upload >>>>>>> not requested. Skipped. >>>>>>> Oct 30 17:35:20 raspberrypi weewx[10216]: reportengine: Running >>>>>>> report RSYNC >>>>>>> Oct 30 17:35:20 raspberrypi weewx[10216]: reportengine: Found >>>>>>> configuration file /etc/weewx/skins/Rsync/skin.conf for report RSYNC >>>>>>> Oct 30 17:35:20 raspberrypi weewx[10216]: reportengine: rsync upload >>>>>>> not requested. Skipped. >>>>>>> >>>>>>> so any hint what is wrong that WU does not get soil temp? >>>>>>> https://www.wunderground.com/personal-weather-station/dashbo >>>>>>> ard?ID=IWOJEWDZ56#history there is only C sign >>>>>>> >>>>>>> On Sunday, October 30, 2016 at 4:52:01 PM UTC+1, Jacek Skowroński >>>>>>> wrote: >>>>>>>> >>>>>>>> I'm transferring both modes, >>>>>>>> I had stopped weewx and run weewd so from its output I know taht >>>>>>>> there is soiltemp1 and has value 46. other has none. >>>>>>>> I did for fe minutes and output was similiar. >>>>>>>> Is it debug? Or it's something different? >>>>>>>> >>>>>>>> On Sunday, October 30, 2016 at 10:21:19 AM UTC+1, Andrew Milner >>>>>>>> wrote: >>>>>>>>> >>>>>>>>> Tom expressed doubts as to whether WU displayed soil temps on >>>>>>>>> rapid fire - and you appear to be using rapid fire. Have you tried >>>>>>>>> uploading normal archive records instead of rapid firing?? >>>>>>>>> >>>>>>>>> Did you run with debug set, as Tom suggested, and confirm that the >>>>>>>>> REC and LOOP contain the soil temperature?? >>>>>>>>> >>>>>>>>> >>>>>>>>> On Sunday, 30 October 2016 10:02:55 UTC+2, Jacek Skowroński wrote: >>>>>>>>> >>>>>>>>>> I had changed the probe slot for 1, and now I have >>>>>>>>>> soilTemp1: 46.0, >>>>>>>>>> >>>>>>>>>> but on the WU page something is strange. I get C close to the >>>>>>>>>> soil temp, but there is no value. >>>>>>>>>> https://www.wunderground.com/personal-weather-station/dashbo >>>>>>>>>> ard?ID=IWOJEWDZ56#history >>>>>>>>>> >>>>>>>>>> On Saturday, October 29, 2016 at 9:49:27 PM UTC+2, Jacek >>>>>>>>>> Skowroński wrote: >>>>>>>>>>> >>>>>>>>>>> Hi, >>>>>>>>>>> I have Davis Vatange pro2 with external leaf_soil module located >>>>>>>>>>> on ID=2. >>>>>>>>>>> So according to help I did such an command >>>>>>>>>>> >>>>>>>>>>> wee_device --set-transmitter-type=2,8,1,1 >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> So if I understood it correctly I would have temperature and >>>>>>>>>>> humidity of soil on the external temp1 and external hum1. >>>>>>>>>>> How to get those data to WU? >>>>>>>>>>> >>>>>>>>>>> Just now on my station we do not see temp and humidity of the >>>>>>>>>>> soil. >>>>>>>>>>> https://www.wunderground.com/personal-weather-station/dashbo >>>>>>>>>>> ard?ID=IWOJEWDZ56 >>>>>>>>>>> >>>>>>>>>>> Next topic is best timings for sending data, is it possible to >>>>>>>>>>> get data in RealTime? >>>>>>>>>>> In general Davis has archival for 5min (300sec) so it sends data >>>>>>>>>>> every 5minute. >>>>>>>>>>> I had tried rapid fire, but it sends data every 2.5 sec but data >>>>>>>>>>> changes every 5minute so it's a little bit crazy. >>>>>>>>>>> >>>>>>>>>>> Is there anybody using Davis Vantage pro2 and WU and could share >>>>>>>>>>> your config? >>>>>>>>>>> >>>>>>>>>>> Thanks in advance >>>>>>>>>>> BR >>>>>>>>>>> Jacek >>>>>>>>>>> >>>>>>>>>> -- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "weewx-user" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>> send an email to [email protected]. >>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>> >>>>>> >>>>>> -- >>>>>> You received this message because you are subscribed to a topic in >>>>>> the Google Groups "weewx-user" group. >>>>>> To unsubscribe from this topic, visit https://groups.google.com/d/to >>>>>> pic/weewx-user/WCi0gdv007g/unsubscribe. >>>>>> To unsubscribe from this group and all its topics, send an email to >>>>>> [email protected]. >>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>> >>>>> -- >>>> You received this message because you are subscribed to a topic in the >>>> Google Groups "weewx-user" group. >>>> To unsubscribe from this topic, visit https://groups.google.com/d/to >>>> pic/weewx-user/WCi0gdv007g/unsubscribe. >>>> To unsubscribe from this group and all its topics, send an email to >>>> [email protected]. >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>>> >>>> -- > You received this message because you are subscribed to a topic in the > Google Groups "weewx-user" group. > To unsubscribe from this topic, visit https://groups.google.com/d/ > topic/weewx-user/WCi0gdv007g/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected] > <javascript:_e(%7B%7D,'cvml','weewx-user%[email protected]');> > . > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
