I upgraded to 17.3 and lost ability to collect pool...was working OK until then, though slow to sync with pool sometimes. This has been cycling for 5+ hours now after rebooting and resetting weather station. Keep it simple, cause I'm stupid...or new to Linux (but loving and learning)!
Log file: Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: retrying... Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Using configuration file /etc/weewx/weewx.conf Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Initializing engine Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Loading station type AcuRite (weewx.drivers.acurite) Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: acurite: driver version is 0.24 Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: acurite: R2 will be decoded using sensor constants Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Loading service weewx.engine.StdTimeSynch Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Finished loading service weewx.engine.StdTimeSynch Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Loading service weewx.engine.StdConvert Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: StdConvert target unit is 0x1 Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Finished loading service weewx.engine.StdConvert Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Loading service weewx.engine.StdCalibrate Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Finished loading service weewx.engine.StdCalibrate Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Loading service weewx.engine.StdQC Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Finished loading service weewx.engine.StdQC Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Loading service weewx.wxservices.StdWXCalculate Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: wxcalculate: The following values will be calculated: barometer=prefer_hardware, windchill=prefer_hardware, dewpoint=prefer_hardware, appTemp=prefer_hardware, rainRate=prefer_hardware, windrun=prefer_hardware, heatindex=prefer_hardware, maxSolarRad=prefer_hardware, humidex=prefer_hardware, pressure=prefer_hardware, inDewpoint=prefer_hardware, ET=prefer_hardware, altimeter=prefer_hardware, cloudbase=prefer_hardware Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: wxcalculate: The following algorithms will be used for calculations: altimeter=aaNOAA, maxSolarRad=RS Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Finished loading service weewx.wxservices.StdWXCalculate Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Loading service weewx.engine.StdArchive Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Archive will use data binding wx_binding Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Record generation will be attempted in 'hardware' Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Using archive interval of 300 seconds (specified in weewx configuration) Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Use LOOP data in hi/low calculations: 1 Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Using binding 'wx_binding' to database 'weewx.sdb' Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: manager: Starting backfill of daily summaries Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: manager: Daily summaries up to date Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Finished loading service weewx.engine.StdArchive Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Loading service weewx.restx.StdStationRegistry Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: restx: StationRegistry: Registration not requested. Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Finished loading service weewx.restx.StdStationRegistry Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Loading service weewx.restx.StdWunderground Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: restx: Wunderground-PWS: Data for station KWAOAKHA61 will be posted Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Finished loading service weewx.restx.StdWunderground Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Loading service weewx.restx.StdPWSweather Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: restx: PWSweather: Posting not enabled. Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Finished loading service weewx.restx.StdPWSweather Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Loading service weewx.restx.StdCWOP Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: restx: CWOP: Posting not enabled. Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Finished loading service weewx.restx.StdCWOP Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Loading service weewx.restx.StdWOW Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: restx: WOW: Posting not enabled. Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Finished loading service weewx.restx.StdWOW Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Loading service weewx.restx.StdAWEKAS Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: restx: AWEKAS: Posting not enabled. Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Finished loading service weewx.restx.StdAWEKAS Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Loading service weewx.engine.StdPrint Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Finished loading service weewx.engine.StdPrint Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Loading service weewx.engine.StdReport Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Finished loading service weewx.engine.StdReport Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Starting up weewx version 3.6.2 Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Station does not support reading the time Dec 8 12:56:30 matt-Inspiron-1750 weewx[1937]: engine: Starting main packet loop. Dec 8 12:56:31 matt-Inspiron-1750 weewx[1937]: acurite: Found station at bus=006 device=011 Dec 8 12:56:31 matt-Inspiron-1750 weewx[1937]: acurite: Failed attempt 1 of 10 to get LOOP data: error sending control message: Protocol error Dec 8 12:56:31 matt-Inspiron-1750 kernel: [13871.146102] usb 6-2: usbfs: USBDEVFS_CONTROL failed cmd python rqt 161 rq 1 len 10 ret -71 Dec 8 12:57:01 matt-Inspiron-1750 weewx[1937]: acurite: Found station at bus=006 device=011 Dec 8 12:57:01 matt-Inspiron-1750 weewx[1937]: acurite: Failed attempt 2 of 10 to get LOOP data: error sending control message: Protocol error Dec 8 12:57:01 matt-Inspiron-1750 kernel: [13901.412167] usb 6-2: usbfs: USBDEVFS_CONTROL failed cmd python rqt 161 rq 1 len 10 ret -71 Dec 8 12:57:08 matt-Inspiron-1750 wpa_supplicant[842]: wlan0: CTRL-EVENT-SCAN-STARTED Dec 8 12:57:13 matt-Inspiron-1750 wpa_supplicant[842]: nl80211: send_and_recv->nl_recvmsgs failed: -33 Dec 8 12:57:31 matt-Inspiron-1750 weewx[1937]: acurite: Found station at bus=006 device=011 Dec 8 12:57:31 matt-Inspiron-1750 weewx[1937]: acurite: Failed attempt 3 of 10 to get LOOP data: error sending control message:Protocol error Dec 8 12:57:31 matt-Inspiron-1750 kernel: [13931.740325] usb 6-2: usbfs: USBDEVFS_CONTROL failed cmd python rqt 161 rq 1 len 10ret -71 Dec 8 12:58:02 matt-Inspiron-1750 weewx[1937]: acurite: Found station at bus=006 device=011 Dec 8 12:58:02 matt-Inspiron-1750 weewx[1937]: acurite: Failed attempt 4 of 10 to get LOOP data: error sending control message:Protocol error Dec 8 12:58:02 matt-Inspiron-1750 kernel: [13962.064412] usb 6-2: usbfs: USBDEVFS_CONTROL failed cmd python rqt 161 rq 1 len 10ret -71 Dec 8 12:58:32 matt-Inspiron-1750 weewx[1937]: acurite: Found station at bus=006 device=011 Dec 8 12:58:32 matt-Inspiron-1750 weewx[1937]: acurite: Failed attempt 5 of 10 to get LOOP data: error sending control message:Protocol error Dec 8 12:58:32 matt-Inspiron-1750 kernel: [13992.324531] usb 6-2: usbfs: USBDEVFS_CONTROL failed cmd python rqt 161 rq 1 len 10ret -71 Dec 8 12:59:02 matt-Inspiron-1750 weewx[1937]: acurite: Found station at bus=006 device=011 Dec 8 12:59:02 matt-Inspiron-1750 weewx[1937]: acurite: Failed attempt 6 of 10 to get LOOP data: error sending control message:Protocol error Dec 8 12:59:02 matt-Inspiron-1750 kernel: [14022.655655] usb 6-2: usbfs: USBDEVFS_CONTROL failed cmd python rqt 161 rq 1 len 10ret -71 Dec 8 12:59:08 matt-Inspiron-1750 wpa_supplicant[842]: wlan0: CTRL-EVENT-SCAN-STARTED Dec 8 12:59:32 matt-Inspiron-1750 weewx[1937]: acurite: Found station at bus=006 device=011 Dec 8 12:59:32 matt-Inspiron-1750 kernel: [14052.871810] usb 6-2: usbfs: USBDEVFS_CONTROL failed cmd python rqt 161 rq 1 len 10ret -71 Dec 8 12:59:32 matt-Inspiron-1750 weewx[1937]: acurite: Failed attempt 7 of 10 to get LOOP data: error sending control message:Protocol error Dec 8 13:00:03 matt-Inspiron-1750 weewx[1937]: acurite: Found station at bus=006 device=011 Dec 8 13:00:03 matt-Inspiron-1750 weewx[1937]: acurite: Failed attempt 8 of 10 to get LOOP data: error sending control message: Protocol error Dec 8 13:00:03 matt-Inspiron-1750 kernel: [14083.182919] usb 6-2: usbfs: USBDEVFS_CONTROL failed cmd python rqt 161 rq 1 len 10 ret -71 -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
