See If this thread helps https://groups.google.com/forum/?fromgroups#!msg/weewx-user/0WabUwmGPAU/ZjaA8xnVKQAJ;context-place=searchin/weewx-user/accurite$20calibration$20constants%7Csort:relevance
On Friday, 30 December 2016 16:57:43 UTC+2, Dennis Hall wrote: > I recently installed weewx on my Raspberry Pi. I am missing the Barometer > readings > > http://kk7x.duckdns.org/weewx > > Acurite 1035 USB 4 Installed with Debian > > Anyway to fix this issue? > > Dennis > > Dec 30 06:43:26 raspberrypi weewx[723]: acurite: Found station at bus=001 > device=004 > Dec 30 06:43:26 raspberrypi weewx[723]: acurite: R2: unknown calibration > constants: 02 00 00 43 ea 0c d7 01 66 06 86 8a 1c 15 ab 09 c4 05 fd 06 0a > 87 e9 9e 70 > > [AcuRite] > # This section is for AcuRite weather stations. > > # The station model, e.g., 'AcuRite 01025' or 'AcuRite 02032C' > model = AcuRite 01035 > > # The driver to use: > driver = weewx.drivers.acurite > use_constants = True > > [StdQC] > > [[MinMax]] > barometer = 28, 34.5, inHg > outTemp = -40, 120, degree_F > inTemp = 10, 120, degree_F > outHumidity = 0, 100 > inHumidity = 0, 100 > windSpeed = 0, 120, mile_per_hour > pressure = 24, 34.5, inHg > > StdWXCalculate] > > [[Calculations]] > # Derived quantities are calculated by this service. Possible > values are: > # hardware - use the value provided by hardware > # software - use the value calculated by weewx > # prefer_hardware - use value provide by hardware if available, > # otherwise use value calculated by weewx > > pressure = prefer_hardware > barometer = prefer_hardware > altimeter = prefer_hardware > windchill = prefer_hardware > heatindex = prefer_hardware > dewpoint = prefer_hardware > inDewpoint = prefer_hardware > rainRate = prefer_hardware > > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
