Are we talking about in the weewx.conf file? (Yes) Or in the acurite.py driver?
What is the location of the driver file? Dennis On Friday, December 30, 2016 at 8:44:16 AM UTC-8, Andrew Milner wrote: > > So did you set ignore_bounds to true and still get the same result? > > > > On Friday, 30 December 2016 18:13:21 UTC+2, Andrew Milner wrote: > >> See If this thread helps >> >> https://groups.google.com/forum/?fromgroups#!msg/weewx-user/0WabUwmGPAU/ZjaA8xnVKQAJ;context-place=searchin/weewx-user/accurite$20calibration$20constants%7Csort:relevance >> >> >> >> >> On Friday, 30 December 2016 16:57:43 UTC+2, Dennis Hall wrote: >> >>> I recently installed weewx on my Raspberry Pi. I am missing the >>> Barometer readings >>> >>> http://kk7x.duckdns.org/weewx >>> >>> Acurite 1035 USB 4 Installed with Debian >>> >>> Anyway to fix this issue? >>> >>> Dennis >>> >>> Dec 30 06:43:26 raspberrypi weewx[723]: acurite: Found station at >>> bus=001 device=004 >>> Dec 30 06:43:26 raspberrypi weewx[723]: acurite: R2: unknown calibration >>> constants: 02 00 00 43 ea 0c d7 01 66 06 86 8a 1c 15 ab 09 c4 05 fd 06 0a >>> 87 e9 9e 70 >>> >>> [AcuRite] >>> # This section is for AcuRite weather stations. >>> >>> # The station model, e.g., 'AcuRite 01025' or 'AcuRite 02032C' >>> model = AcuRite 01035 >>> >>> # The driver to use: >>> driver = weewx.drivers.acurite >>> use_constants = True >>> >>> [StdQC] >>> >>> [[MinMax]] >>> barometer = 28, 34.5, inHg >>> outTemp = -40, 120, degree_F >>> inTemp = 10, 120, degree_F >>> outHumidity = 0, 100 >>> inHumidity = 0, 100 >>> windSpeed = 0, 120, mile_per_hour >>> pressure = 24, 34.5, inHg >>> >>> StdWXCalculate] >>> >>> [[Calculations]] >>> # Derived quantities are calculated by this service. Possible >>> values are: >>> # hardware - use the value provided by hardware >>> # software - use the value calculated by weewx >>> # prefer_hardware - use value provide by hardware if available, >>> # otherwise use value calculated by weewx >>> >>> pressure = prefer_hardware >>> barometer = prefer_hardware >>> altimeter = prefer_hardware >>> windchill = prefer_hardware >>> heatindex = prefer_hardware >>> dewpoint = prefer_hardware >>> inDewpoint = prefer_hardware >>> rainRate = prefer_hardware >>> >>> >>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
