Hi Bill Many thanks for the pointer to your github account.
I have decided to start with a completely new build. I am using a Raspberry Pi 3, and a USB hard drive. I have set the PI up to boot from the USB drive completely, using the new Pi3 MSD boot protocol, ie. no SD card is used. So far I have installed weewx and MQTT (mosquitto), but I have to wait now for a RTC board to arrive. In the mean time I will clean up the Esp8266 sensors, mount them on perf board, arrange battery supplies etc, lots of work! My present station is an Oregon sensor based affair feeding a RFX receiver into Meteohub. It has worked well for years but the sensors are getting past their time, and I wish to replace them with more accurate ones. I have a couple of questions regarding weewx, 1. if I have NO "known", (in the list of weewx stations), weather station, just wxMesh, will weewx function OK if I just add your driver to the weewx.conf, or is there anything else to change? 2. In your MQTT driver, you state that the units have to be US, if I have Weewx set to metric units, will the driver still work?. I cannot see any data conversions in your driver. cheers Patrick On Friday, 27 January 2017 16:34:24 UTC, Bill Morrow wrote: > > > Yes, I have Patrick. > > https://github.com/morrowwm/weewxMQTT > <https://www.google.com/url?q=https%3A%2F%2Fgithub.com%2Fmorrowwm%2FweewxMQTT&sa=D&sntz=1&usg=AFQjCNFswn3LrUgvN5CFHcbQRyP0wvFt-A> > > I'm actually merging in indoor data collected by an Adafruit Feather > Huzzah which uses esp8266 to publish on my LAN. > > On Friday, 27 January 2017 12:28:05 UTC-4, superpat wrote: >> >> Hi Bill, >> >> I have just found this thread, it seems to be exactly what I need to feed >> my esp8266 sensors into weewx via MQTT. >> >> Please..... Have you put your work on github again?, if so where? >> >> many thanks >> >> regards >> >> Patrick >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
