Hi MWall, The legacy pyusb interface used in the current wmr300 driver only talks to libusb0, as far as I can tell. Using the pyusb 1.0 interface I can specify which version of libusb to use or tell which one is called by default. I have put that code in my "wmr300c" driver. I mainly use libusb1 and it seems reasonably robust.
The only problem I have found since November was when I used the windows software to clear the history and restarted weewx with very few, if any, records in the history. I seem to have an off-by-one or two issue. The firmware of the wmr300 leaves a lot to be desired. There seems to be only one way to do anything and if you deviate from the path you are in trouble. I previously promised to check the rain counter filling, but, having seen how little control is available from the PC in other aspects, I an sure there will be no way to remotely clear it. The fact that I broke my wind vane shaft while having the system temporarily mounted on the ground encouraged me to get it out of my reach and fixed up on the roof. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
