Hi mwall, I have tested your last driver and It seems to work well.
Thanks. El 15 feb. 2017 3:34 AM, "Cameron D" <[email protected]> escribió: > Hi MWall, > The legacy pyusb interface used in the current wmr300 driver only talks to > libusb0, as far as I can tell. > Using the pyusb 1.0 interface I can specify which version of libusb to use > or tell which one is called by default. I have put that code in my > "wmr300c" driver. I mainly use libusb1 and it seems reasonably robust. > > The only problem I have found since November was when I used the windows > software to clear the history and restarted weewx with very few, if any, > records in the history. I seem to have an off-by-one or two issue. > > The firmware of the wmr300 leaves a lot to be desired. There seems to be > only one way to do anything and if you deviate from the path you are in > trouble. > > I previously promised to check the rain counter filling, but, having seen > how little control is available from the PC in other aspects, I an sure > there will be no way to remotely clear it. > The fact that I broke my wind vane shaft while having the system > temporarily mounted on the ground encouraged me to get it out of my reach > and fixed up on the roof. > > -- > You received this message because you are subscribed to a topic in the > Google Groups "weewx-user" group. > To unsubscribe from this topic, visit https://groups.google.com/d/ > topic/weewx-user/YSz_IWnzOjE/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
