If you have said windchill and/or heat index are hardware generated then: a) According to WMR300 manual the wmr300 only calculates (and so only provides) heat index when temp is > 80F and humidity > 40% b) I do not know how/when windchill is calculated by wmr300 - manual says it is based on wind speed and temperature, and then goes on to say it is based on channel 1 temperature and humidity. This leaves me confused
If it does not calculate heatindex or windchill then I assume the output from the station is Null (none or n/a) If you have said weewx should calculate windchill (software preferred) then weewx will calculate values when temp > 80, humidity > 40 or temp<50, wind > 5 - or will just set to outdoor temperature If you have said hardware preferred then what you see will depend on what the hardware outputs, and weewx will not necessarily perform a calculation if the hardware provides a value of some sort. Why not set windchill and heatindex to software or software preferred, and see what happens - do you then get meaningful values?? On Monday, 27 February 2017 12:49:30 UTC+2, Miguel Iniesta wrote: > > Hello Andrew, > > I don’t have access to the station right now but weewx does not even > default to outdoor temp. > > You can have a look: www.navarredondilla.info > > Thanks. > > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
