It is of course quite right and proper that there is not always a heat index or windchill value - and in fact you can never have both available!!!!!
On Monday, 27 February 2017 14:10:30 UTC+2, Andrew Milner wrote: > If you have said windchill and/or heat index are hardware generated then: > a) According to WMR300 manual the wmr300 only calculates (and so only > provides) heat index when temp is > 80F and humidity > 40% > b) I do not know how/when windchill is calculated by wmr300 - manual says > it is based on wind speed and temperature, and then goes on to say it is > based on channel 1 temperature and humidity. This leaves me confused > > If it does not calculate heatindex or windchill then I assume the output > from the station is Null (none or n/a) > > If you have said weewx should calculate windchill (software preferred) > then weewx will calculate values when temp > 80, humidity > 40 or temp<50, > wind > 5 - or will just set to outdoor temperature > > If you have said hardware preferred then what you see will depend on what > the hardware outputs, and weewx will not necessarily perform a calculation > if the hardware provides a value of some sort. > > Why not set windchill and heatindex to software or software preferred, and > see what happens - do you then get meaningful values?? > > > > > On Monday, 27 February 2017 12:49:30 UTC+2, Miguel Iniesta wrote: > >> >> Hello Andrew, >> >> I don’t have access to the station right now but weewx does not even >> default to outdoor temp. >> >> You can have a look: www.navarredondilla.info >> >> Thanks. >> >> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
