See the User's Guide, section *WeeWX generates HTML pages, but it does not update them <http://weewx.com/docs/usersguide.htm#html_generated_but_not_updated>*.
-tk On Sat, Mar 25, 2017 at 5:21 AM, Ted Northrup <[email protected]> wrote: > Hi Gary, > A million thanks for taking a look at this stubborn problem. I have > attached the abbreviated log per your instructions. I think weewx and > vantage are both sensitive to time. Is it possible that the database's time > is out of adjustment? And I noticed that the number of pages retrieved > keeps going up and up (vantage: Retrieving 284 page(s)). I have also > attached a GREP screenshot. I think it says I have only one instance > running. > I have temporary renamed index.html in the weewx directory and stopped the > service so my neighbors won't think the system is running. I also did an > "ls /dev/ttyUSB0" and that port did show up. And as stated previously, I > ran weewx from the command line and data from the VantagePro did stream on > the screen. > > Again, many thanks, > Ted Northrup > > > On Friday, March 24, 2017 at 6:45:00 PM UTC-4, gjr80 wrote: >> >> Hi, >> >> The issue is with weeWX not with anything else, once we get that sorted >> WU should come back up, and I suspect Apache is running fine as well. >> Towards the end of the log extract you had some communications issues with >> your station and as a result weeWX has not been receiving any data from the >> station, weeWX continues to generate reports every minute but since there >> is no new data the report is the same as the last one. There is a lot of >> activity in your log extract covering several stop/starts of weeWX so lets >> go back a bit. Edit weewx.conf, set debug=1 then save weewx.conf. Now >> stop then start weeWX. After a few minutes take a log extract from when >> weeWX was just started until a few report cycles have completed. It's >> important to capture all of the log from startup. Post that extract and >> let's have a look. >> >> Just to be safe you might also want to have a look to see if any remnants >> are hanging around from previous weeWX instances, from the command line type >> >> $ ps -aux|grep weewx >> >> If weeWX is running that should show one line with something like >> >> /usr/bin/python /home/weewx/bin/weewxd --daemon --pidfile=/var/run/weewx.pid >> /home/weewx/weewx.conf >> >> at the end. If there are more lines that have '/usr/bin/python >> /home/weewx/bin/weewxd' at the end then there may be more than one >> instance of weeWX running and they will need to be closed. Post the output >> from the ps-aux command so we can see. >> >> Gary >> >> On Saturday, 25 March 2017 02:10:51 UTC+10, Ted Northrup wrote: >>> >>> When I did my first backup of my SD card, Weewx stopped updating weather >>> data on the index.html file with the VantagePro2 info. I checked to make >>> sure the RPi was getting the data, so I ran Weewx manually. The data from >>> the weather station scrolled on my Putty screen, so the USB port is >>> working. Weewx is continueing to update weewx uptime portion of the page. >>> But the date/time/weather data does not change. It appears that it is not >>> sending updates to Weather Underground either. In reviewing the bottom of >>> the attached log I saw the error about hardware archive interval not >>> matching weewx' internal. I changed that to 60 and restarted the weewx >>> service. No change in the screen. >>> You can see this stalled page at www.queensoaks.org/weewx. >>> I have restarted the Apache2 and weewx services several times and >>> rebooted the RPi twice. No luck! Hope you experts can see something in >>> the extended log attached. The folks in our condo building have come to >>> depend on this service. >>> >>> Ted Northrup >>> >> -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
