In weewx.conf look for the CWOP section. Below is how mine is setup.
[[CWOP]]
# This section is for configuring posts to CWOP.
# If you wish to do this, set the option 'enable' to true,
# and specify the station ID (e.g., CW1234).
enable = true
station = KB1PVH-13
post_interval = 600
log_success = True
log_failure = True
server_list = rotate.aprs.net:14580, rotate.aprs2.net:14580,
cwop.aprs.net:14580, cwop.aprs.net:23
passcode = xxxxxx
# If this is an APRS (radio amateur) station, uncomment
# the following and replace with a passcode (e.g., 12345).
#passcode = replace_me (APRS stations only)
Dave-KB1PVH
On Thu, Apr 6, 2017 at 1:47 PM, Clinton <[email protected]> wrote:
> Thanks for the quick replies. Yes, I am an amateur radio operator and I
> do have a passcode. It was working up until yesterday. The firewall
> hasn't changed. I can ping cwop.aprs.net fine.
> PING cwop.aprs.net (85.188.1.27) 56(84) bytes of data.
> 64 bytes from cwop.aprs.net (85.188.1.27): icmp_seq=1 ttl=52 time=202 ms
>
> Where do I change the server to rotate.aprs.net?
>
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> For more options, visit https://groups.google.com/d/optout.
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
