A lot of thank’s.
Here you have.
Using configuration file /etc/weewx/weewx.conf
Using database binding 'wx_binding', which is bound to database 'archive_sqlite'
System info
CPU implementer: 0x41
Features: half thumb fastmult vfp edsp neon vfpv3 tls vfpv4
idiva idivt vfpd32 lpae evtstrm
CPU architecture: 7
BogoMIPS: 38.40
Hardware: BCM2709
CPU revision: 5
CPU part: 0xc07
model name: ARMv7 Processor rev 5 (v7l)
Serial: 0000000081eaa714
processor: 3
CPU variant: 0x0
Revision: a01041
Operating system: debian 8.0
Linux ea5by-meteo 4.1.17-v7+ #838 SMP Tue Feb 9
13:15:09 GMT 2016 armv7l
1 minute load average: 0.01
5 minute load average: 0.14
15 minute load average: 0.38
General weewx info
Weewx version 3.7.1 detected.
Station info
Station type: Vantage
Driver: weewx.drivers.vantage
Driver info
[Vantage]
# This section is for a Davis VantagePro2, VantageVue or WeatherLinkIP
# Connection type: serial or ethernet
# serial (the classic VantagePro)
# ethernet (the WeatherLinkIP)
type = serial
# If the connection type is serial, a port must be specified:
# Debian, Ubuntu, Redhat, Fedora, and SuSE:
# /dev/ttyUSB0 is a common USB port name
# /dev/ttyS0 is a common serial port name
# BSD:
# /dev/cuaU0 is a common serial port name
port = /dev/ttyUSB0
# port = /dev/ttyUSB0
# If the connection type is ethernet, an IP Address/hostname is required:
host = 1.2.3.4
######################################################
# The rest of this section rarely needs any attention.
# You can safely leave it "as is."
######################################################
# Serial baud rate (usually 19200)
baudrate = 19200
# TCP port (when using the WeatherLinkIP)
tcp_port = 22222
# TCP send delay (when using the WeatherLinkIP):
tcp_send_delay = 1
# The id of your ISS station (usually 1)
iss_id = 1
# How long to wait for a response from the station before giving up (in
# seconds; must be greater than 2)
timeout = 5
# How long to wait before trying again (in seconds)
wait_before_retry = 1.2
# How many times to try before giving up:
max_tries = 4
# The driver to use:
driver = weewx.drivers.vantage
Currently installed extensions
Extension Name Version Description
cmon 0.13 Collect and display computer health indicators.
wcloud 0.10 Upload weather data to WeatherCloud.
crt 0.13 Emit a Cumulus realtime.txt for LOOP data.
Archive info
Database name: weewx.sdb
Table name: archive
Unit system: 1 (US)
First good timestamp: 2015-12-08 16:12:02 CET (1449587522)
Last good timestamp: 2017-05-06 20:30:00 CEST (1494095400)
Number of records: 110759
weewx (weewx.conf) is set to use an archive interval of 300 seconds.
The station hardware was not interrogated in determining archive interval.
Databases configured in weewx.conf
Database name: weewx.sdb
Database driver: weedb.sqlite
Database name: weewx
Database driver: weedb.mysql
Database host: localhost
Database name: cmon.sdb
Database driver: weedb.sqlite
Parsed and obfuscated weewx.conf
# WEEWX CONFIGURATION FILE
#
# Copyright (c) 2009-2015 Tom Keffer <[email protected]>
# See the file LICENSE.txt for your rights.
##############################################################################
# This section is for general configuration information.
# Set to 1 for extra debug info, otherwise comment it out or set to zero
debug = 1
# Root directory of the weewx data file hierarchy for this station
WEEWX_ROOT = /
# How long to wait before timing out a socket (FTP, HTTP) connection
socket_timeout = 20
# Do not modify this. It is used when installing and updating weewx.
version = 3.7.1
##############################################################################
# This section is for information about the station.
[Station]
# Description of the station location
location = "EA5BY, Santa Pola (Alicante)" # REEMPLAZAR
# Latitude and longitude in decimal degrees
latitude = 38.191271 # REEMPLAZAR
longitude = -0.582632 # REEMPLAZAR
# Altitude of the station, with unit it is in. This is downloaded from
# from the station if the hardware supports it.
altitude = 22, meter # REEMPLAZAR
# Set to type of station hardware. There must be a corresponding stanza
# in this file with a 'driver' parameter indicating the driver to be used.
station_type = Vantage
# The start of the rain year (1=January; 10=October, etc.). This is
# downloaded from the station if the hardware supports it.
rain_year_start = 1
# Start of week (0=Monday, 6=Sunday)
week_start = 6
# If you have a website, you may specify an URL
station_url = XXX obfuscated by wee_debug XXX
##############################################################################
[Vantage]
# This section is for a Davis VantagePro2, VantageVue or WeatherLinkIP
# Connection type: serial or ethernet
# serial (the classic VantagePro)
# ethernet (the WeatherLinkIP)
type = serial
# If the connection type is serial, a port must be specified:
# Debian, Ubuntu, Redhat, Fedora, and SuSE:
# /dev/ttyUSB0 is a common USB port name
# /dev/ttyS0 is a common serial port name
# BSD:
# /dev/cuaU0 is a common serial port name
port = /dev/ttyUSB0
# port = /dev/ttyUSB0
# If the connection type is ethernet, an IP Address/hostname is required:
host = 1.2.3.4
######################################################
# The rest of this section rarely needs any attention.
# You can safely leave it "as is."
######################################################
# Serial baud rate (usually 19200)
baudrate = 19200
# TCP port (when using the WeatherLinkIP)
tcp_port = 22222
# TCP send delay (when using the WeatherLinkIP):
tcp_send_delay = 1
# The id of your ISS station (usually 1)
iss_id = 1
# How long to wait for a response from the station before giving up (in
# seconds; must be greater than 2)
timeout = 5
# How long to wait before trying again (in seconds)
wait_before_retry = 1.2
# How many times to try before giving up:
max_tries = 4
# The driver to use:
driver = weewx.drivers.vantage
##############################################################################
# This section is for uploading data to Internet si
[StdRESTful]
[[StationRegistry]]
# To register this weather station with weewx, set this to true
register_this_station = true
description = EA5BY HamRadio Station # REEMPLAZAR
station_url = XXX obfuscated by wee_debug XXX #REEMPLAZAR
[[AWEKAS]]
# This section is for configuring posts to AWEKAS.
# If you wish to do this, set the option 'enable' to true,
# and specify a username and password.
enable = false
username = XXX obfuscated by wee_debug XXX
password = XXX obfuscated by wee_debug XXX
[[CWOP]]
# This section is for configuring posts to CWOP.
# If you wish to do this, set the option 'enable' to true,
# and specify the station ID (e.g., CW1234).
enable = true
station = XXX obfuscated by wee_debug XXX #REEMPLAZAR
# If this is an APRS (radio amateur) station, uncomment
# the following and replace with a passcode (e.g., 12345).
passcode = 23265 # REEMPLAZAR CON NUMERO DE REGISTRO UIVIEW
post_interval = 900
log_success = True
log_failure = True
[[PWSweather]]
# This section is for configuring posts to PWSweather.com.
# If you wish to do this, set the option 'enable' to true,
# and specify a station and password.
enable = false # REEMPLAZAR POR FALSE SI NO INTERESA
station = XXX obfuscated by wee_debug XXX # REEMPLAZAR SI TRUE
password = XXX obfuscated by wee_debug XXX # REEMPLAZAR SI TRUE
[[WOW]]
# This section is for configuring posts to WOW.
# If you wish to do this, set the option 'enable' to true,
# and specify a station and password.
enable = false
station = XXX obfuscated by wee_debug XXX
password = XXX obfuscated by wee_debug XXX
[[Wunderground]]
# This section is for configuring posts to the Weather Underground.
# If you wish to do this, set the option 'enable' to true,
# and specify a station (e.g., 'KORHOODR3') and password.
enable = false # REEMPLAZAR POR FALSE SI NO INTERESA
station = XXX obfuscated by wee_debug XXX # REEMPLAZAR SI TRUE
password = XXX obfuscated by wee_debug XXX # REMPLAZAR SI TRUE
# Set the following to True to have weewx use the WU "Rapidfire"
# protocol. Not all hardware can support it. See the User's Guide.
rapidfire = False
[[WeatherCloud]]
id = XXX obfuscated by wee_debug XXX
key = XXX obfuscated by wee_debug XXX
##############################################################################
# This section specifies what reports, using which skins, to generate.
[StdReport]
# Where the skins reside, relative to WEEWX_ROOT
SKIN_ROOT = /etc/weewx/skins
# Where the generated reports should go, relative to WEEWX_ROOT
HTML_ROOT = /var/www/weewx
# The database binding indicates which data should be used in reports.
data_binding = wx_binding
# Each of the following subsections defines a report that will be run.
[[StandardReport]]
# See the customizing guide to change the units, plot types and line
# colors, modify the fonts, display additional sensor data, and other
# customizations. Many of those changes can be made here by overriding
# parameters, or by modifying templates within the skin itself.
# The StandardReport uses the 'Standard' skin, which contains the
# images, templates and plots for the report.
skin = Standard
[[[Units]]]
[[[[Groups]]]]
group_altitude = meter
group_speed2 = knot2
group_pressure = mbar
group_rain = mm
group_rainrate = mm_per_hour
group_temperature = degree_C
group_degree_day = degree_C_day
group_speed = knot
[[cmon]]
HTML_ROOT = /var/www/weewx/cmon
skin = cmon
[[FTP]]
# FTP'ing the results to a webserver is treated as just another report,
# albeit one with an unusual report generator!
skin = Ftp
# Set to True for a secure FTP (SFTP) connection. Not all servers
# support this.
secure_ftp = False
# To upload files from something other than what HTML_ROOT is set
# to above, specify a different HTML_ROOT here.
#HTML_ROOT = /var/www/weewx
# Most FTP servers use port 21
port = 21
# If you wish to use FTP, uncomment and fill out the next four lines.
passive = 1
user = XXX obfuscated by wee_debug XXX # REEMPLAZAR
password = XXX obfuscated by wee_debug XXX # REEMPLAZAR
server = ftp.ea5by.es # REEMPLAZAR
path = /meteo # REEMPLAZAR
max_tries = 3
# Set to 1 to use passive mode, zero for active mode
[[RSYNC]]
# rsync'ing to a webserver is treated as just another report
skin = Rsync
# If you wish to use rsync, you must configure passwordless ssh using
# public/private key authentication from the user account that weewx
# runs as to the user account on the remote machine where the files
# will be copied.
#
# The following three lines determine where files will be sent.
#server = replace with the rsync server name, e.g, www.threefools.org
#path = replace with the rsync destination directory (e.g., /weather)
#user = replace with the rsync username
# Rsync can be configured to remove files from the remote server if
# they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you
# make a mistake in the remote path, you could could unintentionally
# cause unrelated files to be deleted. Set to 1 to enable remote file
# deletion, zero to allow files to accumulate remotely.
delete = 0
##############################################################################
# This service acts as a filter, converting the unit system coming from
# the hardware to a unit system in the database.
[StdConvert]
# The target_unit affects only the unit system in the database. Once
# chosen it cannot be changed without converting the entire database.
# Modification of target_unit after starting weewx will result in
# corrupt data - the database will contain a mix of US and METRIC data.
#
# The value of target_unit does not affect the unit system for
# reporting - reports can display US, Metric, or any combination of units.
#
# In most cases, target_unit should be left as the default: US
#
# In particular, those migrating from a standard wview installation
# should use US since that is what the wview database contains.
# DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING!
target_unit = US # Options are 'US', 'METRICWX', or 'METRIC'
##############################################################################
# This section can adjust data using calibration expressions.
[StdCalibrate]
[[Corrections]]
# For each type, an arbitrary calibration expression can be given.
# It should be in the units defined in the StdConvert section.
# Example:
foo = foo + 0.2
##############################################################################
# This section is for quality control checks. If units are not specified,
# values must be in the units defined in the StdConvert section.
[StdQC]
[[MinMax]]
barometer = 26, 32.5, inHg
outTemp = -40, 120, degree_F
inTemp = 10, 120, degree_F
outHumidity = 0, 100
inHumidity = 0, 100
windSpeed = 0, 120, mile_per_hour
pressure = 24, 34.5, inHg
##############################################################################
# This section controls the origin of derived values.
[StdWXCalculate]
[[Calculations]]
# Derived quantities are calculated by this service. Possible values
are:
# hardware - use the value provided by hardware
# software - use the value calculated by weewx
# prefer_hardware - use value provide by hardware if available,
# otherwise use value calculated by weewx
pressure = prefer_hardware
barometer = prefer_hardware
altimeter = prefer_hardware
windchill = prefer_hardware
heatindex = prefer_hardware
dewpoint = prefer_hardware
inDewpoint = prefer_hardware
rainRate = prefer_hardware
##############################################################################
# For hardware that supports it, this section controls how often the
# onboard clock gets updated.
[StdTimeSynch]
# How often to check the weather station clock for drift (in seconds)
clock_check = 14400
# How much it can drift before we will correct it (in seconds)
max_drift = 5
##############################################################################
# This section is for configuring the archive service.
[StdArchive]
# If the station hardware supports data logging then the archive interval
# will be downloaded from the station. Otherwise, specify it (in seconds).
archive_interval = 300
# How long to wait (in seconds) before processing new archive data. Must
# be greater than zero.
archive_delay = 15
# If possible, new archive records are downloaded from the station
# hardware. If the hardware does not support this, then new archive
# records will be generated in software.
# Set the following to "software" to force software record generation.
record_generation = software
# Whether to include LOOP data in hi/low statistics
loop_hilo = True
# The data binding used to save archive records
data_binding = wx_binding
##############################################################################
# This section binds a data store to a database.
[DataBindings]
[[wx_binding]]
# The database must match one of the sections in [Databases].
# This is likely to be the only option you would want to change.
database = archive_sqlite
# The name of the table within the database
table_name = archive
# The manager handles aggregation of data for historical summaries
manager = weewx.wxmanager.WXDaySummaryManager
# The schema defines the structure of the database.
# It is *only* used when the database is created.
schema = schemas.wview.schema
[[cmon_binding]]
manager = weewx.manager.DaySummaryManager
schema = user.cmon.schema
table_name = archive
database = cmon_sqlite
##############################################################################
# This section defines various databases.
[Databases]
# A SQLite database is simply a single file
[[archive_sqlite]]
database_type = SQLite
database_name = weewx.sdb
# MySQL
[[archive_mysql]]
database_type = MySQL
database_name = weewx
[[cmon_sqlite]]
database_name = cmon.sdb
database_type = SQLite
##############################################################################
# This section defines defaults for the different types of databases.
[DatabaseTypes]
# Defaults for SQLite databases
[[SQLite]]
driver = weedb.sqlite
# Directory in which the database files are located
SQLITE_ROOT = /var/lib/weewx
# Defaults for MySQL databases
[[MySQL]]
driver = weedb.mysql
# The host where the database is located
host = localhost
# The user name for logging in to the host
user = XXX obfuscated by wee_debug XXX
# The password for the user name
password = XXX obfuscated by wee_debug XXX
##############################################################################
# This section configures the internal weewx engine.
[Engine]
[[Services]]
# This section specifies the services that should be run. They are
# grouped by type, and the order of services within each group
# determines the order in which the services will be run.
prep_services = weewx.engine.StdTimeSynch
data_services = ,
process_services = weewx.engine.StdConvert, weewx.engine.StdCalibrate,
weewx.engine.StdQC, weewx.wxservices.StdWXCalculate, user.crt.CumulusRealTime,
user.cmon.ComputerMonitor
archive_services = weewx.engine.StdArchive
restful_services = weewx.restx.StdStationRegistry,
weewx.restx.StdWunderground, weewx.restx.StdPWSweather, weewx.restx.StdCWOP,
weewx.restx.StdWOW, weewx.restx.StdAWEKAS, user.wcloud.WeatherCloud
report_services = weewx.engine.StdPrint, weewx.engine.StdReport
##############################################################################
# Options for extension 'crt'
[CumulusRealTime]
filename = /var/www/weewx/realtime.txt
unit_system = METRIC
##############################################################################
# Options for extension 'cmon'
[ComputerMonitor]
data_binding = cmon_binding
##############################################################################
----------
Ruben Navarro Huedo - EA5BZ
[email protected]
De: Thomas Keffer
Enviado: sábado, 6 de mayo de 2017 20:42
Para: weewx-user
Asunto: Re: [weewx-user] weewx <> Vantage Vue Problem
The order in which the engine is loading services is unusual. Could you please
post the complete weewx.conf? Use the tool wee_debug, which will obfuscate any
passwords.
wee_debug --info --output=/var/tmp/weewx.debug
Then post the file /var/tmp/weewx.debug
-tk
On Sat, May 6, 2017 at 11:24 AM, Ruben Navarro Huedo <[email protected]> wrote:
Hello friends:
This evening i was helping a friend with weewx and a Vantage Vue.
weewx is not reading data from Vantage Vue.
Please...could you help me?
Attached log and weewx.conf.
[Vantage]
# This section is for a Davis VantagePro2, VantageVue or WeatherLinkIP
# Connection type: serial or ethernet
# serial (the classic VantagePro)
# ethernet (the WeatherLinkIP)
type = serial
# If the connection type is serial, a port must be specified:
# Debian, Ubuntu, Redhat, Fedora, and SuSE:
# /dev/ttyUSB0 is a common USB port name
# /dev/ttyS0 is a common serial port name
# BSD:
# /dev/cuaU0 is a common serial port name
port = /dev/ttyUSB0
# port = /dev/ttyUSB0
# If the connection type is ethernet, an IP Address/hostname is required:
host = 1.2.3.4
######################################################
# The rest of this section rarely needs any attention.
# You can safely leave it "as is."
######################################################
# Serial baud rate (usually 19200)
baudrate = 19200
# TCP port (when using the WeatherLinkIP)
tcp_port = 22222
# TCP send delay (when using the WeatherLinkIP):
tcp_send_delay = 1
# The id of your ISS station (usually 1)
iss_id = 1
# How long to wait for a response from the station before giving up (in
# seconds; must be greater than 2)
timeout = 5
# How long to wait before trying again (in seconds)
wait_before_retry = 1.2
# How many times to try before giving up:
max_tries = 4
# The driver to use:
driver = weewx.drivers.vantage
May 6 20:20:48 ea5by-meteo weewx[14206]: engine: Initializing weewx version
3.7.1
May 6 20:20:48 ea5by-meteo weewx[14206]: engine: Using Python 2.7.9 (default,
Mar 8 2015, 00:52:26) #012[GCC 4.9.2]
May 6 20:20:48 ea5by-meteo weewx[14206]: engine: Platform
Linux-4.1.17-v7+-armv7l-with-debian-8.0
May 6 20:20:48 ea5by-meteo weewx[14206]: engine: Locale is 'es_ES.UTF-8'
May 6 20:20:48 ea5by-meteo weewx[14206]: engine: pid file is /var/run/weewx.pid
May 6 20:20:48 ea5by-meteo weewx[14210]: engine: Using configuration file
/etc/weewx/weewx.conf
May 6 20:20:48 ea5by-meteo weewx[14210]: engine: debug is 1
May 6 20:20:48 ea5by-meteo weewx[14210]: engine: Initializing engine
May 6 20:20:48 ea5by-meteo weewx[14210]: engine: Loading station type Vantage
(weewx.drivers.vantage)
May 6 20:20:48 ea5by-meteo weewx[14197]: Starting weewx weather system: weewx.
May 6 20:20:48 ea5by-meteo systemd[1]: Started LSB: weewx weather system.
May 6 20:20:48 ea5by-meteo weewx[14210]: vantage: driver version is 3.0.10
May 6 20:20:48 ea5by-meteo weewx[14210]: vantage: Opened up serial port
/dev/ttyUSB0; baud 19200; timeout 5.00
May 6 20:20:49 ea5by-meteo weewx[14210]: vantage: gentle wake up of console
successful
May 6 20:20:49 ea5by-meteo weewx[14210]: vantage: _setup; hardware type is 17
May 6 20:20:49 ea5by-meteo weewx[14210]: engine: Loading service
weewx.engine.StdTimeSynch
May 6 20:20:49 ea5by-meteo weewx[14210]: engine: Finished loading service
weewx.engine.StdTimeSynch
May 6 20:20:49 ea5by-meteo weewx[14210]: engine: Loading service
weewx.engine.StdConvert
May 6 20:20:49 ea5by-meteo weewx[14210]: engine: StdConvert target unit is 0x1
May 6 20:20:49 ea5by-meteo weewx[14210]: engine: Finished loading service
weewx.engine.StdConvert
May 6 20:20:49 ea5by-meteo weewx[14210]: engine: Loading service
weewx.engine.StdCalibrate
May 6 20:20:49 ea5by-meteo weewx[14210]: engine: Finished loading service
weewx.engine.StdCalibrate
May 6 20:20:49 ea5by-meteo weewx[14210]: engine: Loading service
weewx.engine.StdQC
May 6 20:20:49 ea5by-meteo weewx[14210]: engine: Finished loading service
weewx.engine.StdQC
May 6 20:20:49 ea5by-meteo weewx[14210]: engine: Loading service
weewx.wxservices.StdWXCalculate
May 6 20:20:49 ea5by-meteo weewx[14210]: wxcalculate: The following values
will be calculated: barometer=prefer_hardware, windchill=prefer_hardware,
dewpoint=prefer_hardware, appTemp=prefer_hardware, rainRate=prefer_hardware,
windrun=prefer_hardware, heatindex=prefer_hardware,
maxSolarRad=prefer_hardware, humidex=prefer_hardware, pressure=prefer_hardware,
inDewpoint=prefer_hardware, ET=prefer_hardware, altimeter=prefer_hardware,
cloudbase=prefer_hardware
May 6 20:20:49 ea5by-meteo weewx[14210]: wxcalculate: The following algorithms
will be used for calculations: altimeter=aaNOAA, maxSolarRad=RS
May 6 20:20:49 ea5by-meteo weewx[14210]: engine: Finished loading service
weewx.wxservices.StdWXCalculate
May 6 20:20:49 ea5by-meteo weewx[14210]: engine: Loading service
user.crt.CumulusRealTime
May 6 20:20:49 ea5by-meteo weewx[14210]: crt: service version is 0.13
May 6 20:20:49 ea5by-meteo weewx[14210]: crt: units will be displayed as METRIC
May 6 20:20:49 ea5by-meteo weewx[14210]: crt: binding is loop
May 6 20:20:49 ea5by-meteo weewx[14210]: crt: output goes to
/var/www/weewx/realtime.txt
May 6 20:20:49 ea5by-meteo weewx[14210]: engine: Finished loading service
user.crt.CumulusRealTime
May 6 20:20:49 ea5by-meteo weewx[14210]: engine: Loading service
user.cmon.ComputerMonitor
May 6 20:20:49 ea5by-meteo weewx[14210]: cmon: service version is 0.13
May 6 20:20:49 ea5by-meteo weewx[14210]: manager: Daily summary version is 1.0
May 6 20:20:49 ea5by-meteo weewx[14210]: cmon: sysinfo: Linux ea5by-meteo
4.1.17-v7+ #838 SMP Tue Feb 9 13:15:09 GMT 2016 armv7l
May 6 20:20:49 ea5by-meteo weewx[14210]: cmon: cpuinfo: CPU implementer: 0x41
May 6 20:20:49 ea5by-meteo weewx[14210]: cmon: cpuinfo: Features: half thumb
fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm
May 6 20:20:49 ea5by-meteo weewx[14210]: cmon: cpuinfo: CPU architecture: 7
May 6 20:20:49 ea5by-meteo weewx[14210]: cmon: cpuinfo: BogoMIPS: 38.40
May 6 20:20:49 ea5by-meteo weewx[14210]: cmon: cpuinfo: Hardware: BCM2709
May 6 20:20:49 ea5by-meteo weewx[14210]: cmon: cpuinfo: CPU revision: 5
May 6 20:20:49 ea5by-meteo weewx[14210]: cmon: cpuinfo: CPU part: 0xc07
May 6 20:20:49 ea5by-meteo weewx[14210]: cmon: cpuinfo: model name: ARMv7
Processor rev 5 (v7l)
May 6 20:20:49 ea5by-meteo weewx[14210]: cmon: cpuinfo: Serial:
0000000081eaa714
May 6 20:20:49 ea5by-meteo weewx[14210]: cmon: cpuinfo: processor: 3
May 6 20:20:49 ea5by-meteo weewx[14210]: cmon: cpuinfo: CPU variant: 0x0
May 6 20:20:49 ea5by-meteo weewx[14210]: cmon: cpuinfo: Revision: a01041
May 6 20:20:49 ea5by-meteo weewx[14210]: engine: Finished loading service
user.cmon.ComputerMonitor
May 6 20:20:49 ea5by-meteo weewx[14210]: engine: Loading service
weewx.engine.StdArchive
May 6 20:20:49 ea5by-meteo weewx[14210]: engine: Archive will use data binding
wx_binding
May 6 20:20:49 ea5by-meteo weewx[14210]: engine: Record generation will be
attempted in 'software'
May 6 20:20:49 ea5by-meteo weewx[14210]: engine: The archive interval in the
configuration file (300) does not match the station hardware interval (1800).
May 6 20:20:49 ea5by-meteo weewx[14210]: engine: Using archive interval of
1800 seconds (specified by hardware)
May 6 20:20:49 ea5by-meteo weewx[14210]: engine: Use LOOP data in hi/low
calculations: 1
May 6 20:20:49 ea5by-meteo weewx[14210]: manager: Daily summary version is 1.0
May 6 20:20:49 ea5by-meteo weewx[14210]: engine: Using binding 'wx_binding' to
database 'weewx.sdb'
May 6 20:20:49 ea5by-meteo weewx[14210]: manager: Starting backfill of daily
summaries
May 6 20:20:49 ea5by-meteo weewx[14210]: engine: Finished loading service
weewx.engine.StdArchive
May 6 20:20:49 ea5by-meteo weewx[14210]: engine: Loading service
weewx.restx.StdStationRegistry
May 6 20:20:50 ea5by-meteo weewx[14210]: restx: StationRegistry: Station will
be registered.
May 6 20:20:50 ea5by-meteo weewx[14210]: engine: Finished loading service
weewx.restx.StdStationRegistry
May 6 20:20:50 ea5by-meteo weewx[14210]: engine: Loading service
weewx.restx.StdWunderground
May 6 20:20:50 ea5by-meteo weewx[14210]: restx: Wunderground: Posting not
enabled.
May 6 20:20:50 ea5by-meteo weewx[14210]: engine: Finished loading service
weewx.restx.StdWunderground
May 6 20:20:50 ea5by-meteo weewx[14210]: engine: Loading service
weewx.restx.StdPWSweather
May 6 20:20:50 ea5by-meteo weewx[14210]: restx: PWSweather: Posting not
enabled.
May 6 20:20:50 ea5by-meteo weewx[14210]: engine: Finished loading service
weewx.restx.StdPWSweather
May 6 20:20:50 ea5by-meteo weewx[14210]: engine: Loading service
weewx.restx.StdCWOP
May 6 20:20:50 ea5by-meteo weewx[14210]: restx: CWOP: Data for station
EA5BY-13 will be posted
May 6 20:20:50 ea5by-meteo weewx[14210]: engine: Finished loading service
weewx.restx.StdCWOP
May 6 20:20:50 ea5by-meteo weewx[14210]: engine: Loading service
weewx.restx.StdWOW
May 6 20:20:50 ea5by-meteo weewx[14210]: restx: WOW: Posting not enabled.
May 6 20:20:50 ea5by-meteo weewx[14210]: engine: Finished loading service
weewx.restx.StdWOW
May 6 20:20:50 ea5by-meteo weewx[14210]: engine: Loading service
weewx.restx.StdAWEKAS
May 6 20:20:50 ea5by-meteo weewx[14210]: restx: AWEKAS: Posting not enabled.
May 6 20:20:50 ea5by-meteo weewx[14210]: engine: Finished loading service
weewx.restx.StdAWEKAS
May 6 20:20:50 ea5by-meteo weewx[14210]: engine: Loading service
user.wcloud.WeatherCloud
May 6 20:20:50 ea5by-meteo weewx[14210]: restx: WeatherCloud: service version
is 0.10
May 6 20:20:50 ea5by-meteo weewx[14210]: restx: WeatherCloud: Data will be
uploaded for id=53132c819d3cb39e
May 6 20:20:50 ea5by-meteo weewx[14210]: engine: Finished loading service
user.wcloud.WeatherCloud
May 6 20:20:50 ea5by-meteo weewx[14210]: engine: Loading service
weewx.engine.StdPrint
May 6 20:20:50 ea5by-meteo weewx[14210]: engine: Finished loading service
weewx.engine.StdPrint
May 6 20:20:50 ea5by-meteo weewx[14210]: engine: Loading service
weewx.engine.StdReport
May 6 20:20:50 ea5by-meteo weewx[14210]: engine: Finished loading service
weewx.engine.StdReport
May 6 20:20:50 ea5by-meteo weewx[14210]: engine: Starting up weewx version
3.7.1
May 6 20:20:50 ea5by-meteo weewx[14210]: vantage: gentle wake up of console
successful
May 6 20:20:50 ea5by-meteo weewx[14210]: manager: Daily summary version is 1.0
May 6 20:20:50 ea5by-meteo weewx[14210]: engine: Clock error is -0.10 seconds
(positive is fast)
May 6 20:20:50 ea5by-meteo weewx[14210]: vantage: Getting archive packets
since 2017-05-06 20:00:00 CEST (1494093600)
May 6 20:20:50 ea5by-meteo weewx[14210]: vantage: gentle wake up of console
successful
May 6 20:20:50 ea5by-meteo weewx[14210]: manager: Daily summary version is 1.0
May 6 20:20:50 ea5by-meteo weewx[14210]: vantage: Retrieving 0 page(s);
starting index= 0
May 6 20:20:50 ea5by-meteo weewx[14210]: engine: Starting main packet loop.
May 6 20:20:50 ea5by-meteo weewx[14210]: vantage: gentle wake up of console
successful
May 6 20:20:50 ea5by-meteo weewx[14210]: vantage: Requesting 200 LOOP packets.
May 6 20:20:50 ea5by-meteo weewx[14210]: vantage: gentle wake up of console
successful
May 6 20:20:49 ea5by-meteo weewx[14210]: engine: Loading service
weewx.restx.StdStationRegistry
May 6 20:20:50 ea5by-meteo weewx[14210]: restx: StationRegistry: Station will
be registered.
May 6 20:20:50 ea5by-meteo weewx[14210]: engine: Finished loading service
weewx.restx.StdStationRegistry
May 6 20:20:50 ea5by-meteo weewx[14210]: engine: Loading service
weewx.restx.StdWunderground
May 6 20:20:50 ea5by-meteo weewx[14210]: restx: Wunderground: Posting not
enabled.
May 6 20:20:50 ea5by-meteo weewx[14210]: engine: Finished loading service
weewx.restx.StdWunderground
May 6 20:20:50 ea5by-meteo weewx[14210]: engine: Loading service
weewx.restx.StdPWSweather
May 6 20:20:50 ea5by-meteo weewx[14210]: restx: PWSweather: Posting not
enabled.
May 6 20:20:50 ea5by-meteo weewx[14210]: engine: Finished loading service
weewx.restx.StdPWSweather
May 6 20:20:50 ea5by-meteo weewx[14210]: engine: Loading service
weewx.restx.StdCWOP
May 6 20:20:50 ea5by-meteo weewx[14210]: restx: CWOP: Data for station
EA5BY-13 will be posted
May 6 20:20:50 ea5by-meteo weewx[14210]: engine: Finished loading service
weewx.restx.StdCWOP
May 6 20:20:50 ea5by-meteo weewx[14210]: engine: Loading service
weewx.restx.StdWOW
May 6 20:20:50 ea5by-meteo weewx[14210]: restx: WOW: Posting not enabled.
May 6 20:20:50 ea5by-meteo weewx[14210]: engine: Finished loading service
weewx.restx.StdWOW
May 6 20:20:50 ea5by-meteo weewx[14210]: engine: Loading service
weewx.restx.StdAWEKAS
May 6 20:20:50 ea5by-meteo weewx[14210]: restx: AWEKAS: Posting not enabled.
May 6 20:20:50 ea5by-meteo weewx[14210]: engine: Finished loading service
weewx.restx.StdAWEKAS
May 6 20:20:50 ea5by-meteo weewx[14210]: engine: Loading service
user.wcloud.WeatherCloud
May 6 20:20:50 ea5by-meteo weewx[14210]: restx: WeatherCloud: service version
is 0.10
May 6 20:20:50 ea5by-meteo weewx[14210]: restx: WeatherCloud: Data will be
uploaded for id=53132c819d3cb39e
May 6 20:20:50 ea5by-meteo weewx[14210]: engine: Finished loading service
user.wcloud.WeatherCloud
May 6 20:20:50 ea5by-meteo weewx[14210]: engine: Loading service
weewx.engine.StdPrint
May 6 20:20:50 ea5by-meteo weewx[14210]: engine: Finished loading service
weewx.engine.StdPrint
May 6 20:20:50 ea5by-meteo weewx[14210]: engine: Loading service
weewx.engine.StdReport
May 6 20:20:50 ea5by-meteo weewx[14210]: engine: Finished loading service
weewx.engine.StdReport
May 6 20:20:50 ea5by-meteo weewx[14210]: engine: Starting up weewx version
3.7.1
May 6 20:20:50 ea5by-meteo weewx[14210]: vantage: gentle wake up of console
successful
May 6 20:20:50 ea5by-meteo weewx[14210]: manager: Daily summary version is 1.0
May 6 20:20:50 ea5by-meteo weewx[14210]: engine: Clock error is -0.10 seconds
(positive is fast)
May 6 20:20:50 ea5by-meteo weewx[14210]: vantage: Getting archive packets
since 2017-05-06 20:00:00 CEST (1494093600)
May 6 20:20:50 ea5by-meteo weewx[14210]: vantage: gentle wake up of console
successful
May 6 20:20:50 ea5by-meteo weewx[14210]: manager: Daily summary version is 1.0
May 6 20:20:50 ea5by-meteo weewx[14210]: vantage: Retrieving 0 page(s);
starting index= 0
May 6 20:20:50 ea5by-meteo weewx[14210]: engine: Starting main packet loop.
May 6 20:20:50 ea5by-meteo weewx[14210]: vantage: gentle wake up of console
successful
May 6 20:20:50 ea5by-meteo weewx[14210]: vantage: Requesting 200 LOOP packets.
May 6 20:20:50 ea5by-meteo weewx[14210]: vantage: gentle wake up of console
successful
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to a topic in the Google
Groups "weewx-user" group.
To unsubscribe from this topic, visit
https://groups.google.com/d/topic/weewx-user/7yYGyjs2Pms/unsubscribe.
To unsubscribe from this group and all its topics, send an email to
[email protected].
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
