If you had post both skin.conf's we may have be able to help identify the cause for you.
So that was the only change you made to get it working again - stopped weewx, swapped the skin.conf and restarted weewd - no other changes to anything?? On Wednesday, 17 May 2017 12:20:48 UTC+3, Paul Carpenter wrote: > I realised that I needed to lake this more seriously and try and work out > what was going on. > > Well that didn't work but what did was to revert to my previous skin.conf > and drop the vanilla skin.conf in 3.7.1 > > I have no idea (from a visual inspection) why the new one didn't work in > my setup > > Sorry to waste your time > > Paul > > On Saturday, 13 May 2017 12:38:54 UTC+1, gjr80 wrote: >> >> It's not clear to me exactly what the issue is; is dayhumidity.png being >> generated or not. Arguably you could take "*I do have dayhumidity.png in >> the html pages but it is not populated with data*" to mean one of two >> things; either a plot devoid of data or a placeholder with no image. I have >> seen no mention that the logs have been looked at yet - do they show any >> errors; even if they don't have any errors a log extract covering a couple >> of archive periods (along with the .conf files asked for by Andrew) will >> clear up exactly what weeWx is generating and what it is not. >> >> Gary >> >> On Saturday, 13 May 2017 21:09:43 UTC+10, Andrew Milner wrote: >>> >>> perhaps giving us an extract from your archive table together with the >>> .conf and .skin you are using would help shed some light. >>> >>> if it was a units issue I would expect some errors in the log >>> >>> seeing the data which is trying to be plotted would certainly help to >>> understand what may be happening!! >>> >>> is your site available to view? >>> >>> >>> >>> >>> On Saturday, 13 May 2017 13:18:42 UTC+3, Paul Carpenter wrote: >>> >>>> Hi >>>> >>>> I do have data in all fields and it is being displayed in weekly, >>>> monthly and yearly graphs. >>>> >>>> On day 1 I lost outHumidity and since then I have lost all other DAILY >>>> graphs except rain and wind vector. >>>> >>>> Weekly still correct and up-to date >>>> >>>> I sort of suspect some sort of 'units' issue as I rebuilt the conf file >>>> during the conversion but I don't understand how the weekly graph would >>>> still be ok and up to date. >>>> >>>> The Units displaying in daily and weekly graphs are the same. >>>> >>>> >>>> >>>> Many thanks for your help >>>> >>>> Paul >>>> >>>> On Thursday, 11 May 2017 17:13:49 UTC+1, Andrew Milner wrote: >>>>> >>>>> what data do you have in the inHumidity and outHumidity fields in the >>>>> database??? Note the caps in .conf are also required. >>>>> >>>>> On Thursday, 11 May 2017 15:25:14 UTC+3, Paul Carpenter wrote: >>>>>> >>>>>> I also rebuilt a new SD card (for a Pi) to transfer from Wheezy to >>>>>> Jessie and used apt-get to install Weewx 3.7.1 (from 3.6.2 if I remember >>>>>> correctly) >>>>>> >>>>>> I do have dayhumidity.png in the html pages but it is not populated >>>>>> with data. >>>>>> >>>>>> I do have the lines (shown by Tom above) in the skin.conf file for >>>>>> Day, Week, Month and Year >>>>>> >>>>>> Also have the Weekly , Monthly and Yearly png files and these are all >>>>>> populated and up to date. >>>>>> >>>>>> Any ideas appreciated >>>>>> >>>>>> Paul >>>>>> >>>>>> >>>>>> On Wednesday, 3 May 2017 09:05:55 UTC+1, Nick Mason wrote: >>>>>>> >>>>>>> Tom, >>>>>>> >>>>>>> thank you, those two lines of code were missing from skin.conf and >>>>>>> from the backup. >>>>>>> >>>>>>> Just to prove I wasn't going mad I put the original SD card back in >>>>>>> the RPi and they are there! >>>>>>> >>>>>>> I also had to add the code to the monthly and yearly sections, >>>>>>> modified accordingly. >>>>>>> >>>>>>> How they got removed from the backup I have no idea, it seems too >>>>>>> specific for corruption during the backup but stranger things have >>>>>>> happened >>>>>>> >>>>>>> Regards >>>>>>> Nick >>>>>>> >>>>>>> On Tuesday, 2 May 2017 22:55:35 UTC+1, Tom Keffer wrote: >>>>>>>> >>>>>>>> If other images are being generated, but only the dayhumidity.png >>>>>>>> image is missing, the problem must be in the skin.conf file. If you >>>>>>>> did a >>>>>>>> Debian install, it will be located in >>>>>>>> /etc/weewx/skins/Standard/skin.conf >>>>>>>> >>>>>>>> The relevant section should look something like this: >>>>>>>> >>>>>>>> >>>>>>>> ... >>>>>>>> [[[daytempchill]]] >>>>>>>> [[[[windchill]]]] >>>>>>>> [[[[heatindex]]]] >>>>>>>> >>>>>>>> [[[dayhumidity]]] >>>>>>>> [[[[outHumidity]]]] >>>>>>>> >>>>>>>> [[[dayrain]]] >>>>>>>> # Make sure the y-axis increment is at least 0.02 for >>>>>>>> the rain plot >>>>>>>> yscale = None, None, 0.02 >>>>>>>> plot_type = bar >>>>>>>> [[[[rain]]]] >>>>>>>> aggregate_type = sum >>>>>>>> aggregate_interval = 3600 >>>>>>>> label = Rain (hourly total) >>>>>>>> ... >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> On Tue, May 2, 2017 at 9:57 AM, Nick Mason <[email protected]> >>>>>>>> wrote: >>>>>>>> >>>>>>>>> I've had a small but nagging problem for a while with my Raspberry >>>>>>>>> Pi that runs weewx. When I try to upgrade rasbian I get an error >>>>>>>>> message. >>>>>>>>> >>>>>>>>> I'm not sure if I get a partial upgrade or no upgrade following a; >>>>>>>>> >>>>>>>>> sudo apt-get update >>>>>>>>> sudo apt-get upgrade >>>>>>>>> >>>>>>>>> I finally got around to sorting it out by by creating a new >>>>>>>>> MicroSD card with the latest rasbian image. I then decide that along >>>>>>>>> with >>>>>>>>> the latest OS that I'd do a fresh install of weewx as well and this >>>>>>>>> time >>>>>>>>> rather than do a manual download and install using setup.py I would >>>>>>>>> install >>>>>>>>> weewx via apt-get install weewx. >>>>>>>>> >>>>>>>>> All went well, it's a lot easier than the manual method and it >>>>>>>>> worked as advertised. I then replaced the new database with the one >>>>>>>>> from my >>>>>>>>> backup and weewx dutifully brought it up to date. However, I noticed >>>>>>>>> that >>>>>>>>> the graphs on the web page were staggered and out of alignment and >>>>>>>>> that >>>>>>>>> this was because one of the graphs, Outside Humidity, is missing. All >>>>>>>>> that >>>>>>>>> shows is a small box with 'outside humidity' in it. >>>>>>>>> >>>>>>>>> I've had a look through the code and what should be displayed is >>>>>>>>> the dayhumidity.png image. This image isn't being generated and does >>>>>>>>> not >>>>>>>>> appear in /var/www/html/weewx >>>>>>>>> >>>>>>>>> I've compared the new weewx.conf and skin.conf files with the >>>>>>>>> backups I have from the older version and they look the same. >>>>>>>>> >>>>>>>>> Can someone point me at where the report is generated and the >>>>>>>>> image file produced please so I can have a look at what's going on. >>>>>>>>> >>>>>>>>> Thanks >>>>>>>>> Nick >>>>>>>>> >>>>>>>>> -- >>>>>>>>> You received this message because you are subscribed to the Google >>>>>>>>> Groups "weewx-user" group. >>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>> send an email to [email protected]. >>>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>>>> >>>>>>>> >>>>>>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
