Yes.... it is what I need with driver but my programming knowing is not good :(
I did some try without good result. El 20 may. 2017 17:22, "Cameron D" <[email protected]> escribió: The circuit boards are placed: 1. level with the mounting tube (perpendicular to the shafts) , and 2. extending up until the housing diameter starts to get smaller. So, basically, shielding the top half of the large diameter section of housing plus the taper might be enough (depending on placement of RF source). It would be quite simple to add code to the driver to check for existence of a file and simply ignore any wind speed packets while the file exists. It would need to be an option, because it is not particularly efficient, and I would prefer not to do the check for all users. You can have other code (external to weewx) that creates and deletes the file. On Saturday, 20 May 2017 22:30:39 UTC+10, Ruben Navarro Huedo wrote: > > Yes > Only anemometer has problems > I will try shield it ASAP. > > A driver mute could help me also. > > If only a mute when a file exists could be done then it could be the > solution for me > > -- You received this message because you are subscribed to a topic in the Google Groups "weewx-user" group. To unsubscribe from this topic, visit https://groups.google.com/d/ topic/weewx-user/RLuIG7LdO0A/unsubscribe. To unsubscribe from this group and all its topics, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
