Hi, I'm new here, and I'm new on WeeWx. 2 days ago I connect my old
Lacrosse Ws2300 to a Raspberry with WeeWx software installed. All works
fine, and I'm really happy... all, except the datalogger. When I
disconnnect the station for some hours and I connect it again, no old data
is visible on charts. I set the archive interval on 300 seconds, and I
leave all value set on default on weewx.conf, except the [WS23xx] that I
set on this way:
[WS23xx]
# This section is for the La Crosse WS-2300 series of weather stations.
# Serial port such as /dev/ttyS0, /dev/ttyUSB0, or /dev/cuaU0
port = /dev/ttyUSB0
# The station model, e.g., 'LaCrosse WS2317' or 'TFA Primus'
model = LaCrosse WS2300
# The driver to use:
driver = weewx.drivers.ws23xx
Some suggestion? Thanks in advance to all!
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
