Hard to say without seeing the log. See the Wiki article *Posting to weewx-user <https://github.com/weewx/weewx/wiki/Help!-Posting-to-weewx-user>*.
-tk On Wed, May 31, 2017 at 3:09 PM, Andrea Giglietti < [email protected]> wrote: > Hi, I'm new here, and I'm new on WeeWx. 2 days ago I connect my old > Lacrosse Ws2300 to a Raspberry with WeeWx software installed. All works > fine, and I'm really happy... all, except the datalogger. When I > disconnnect the station for some hours and I connect it again, no old data > is visible on charts. I set the archive interval on 300 seconds, and I > leave all value set on default on weewx.conf, except the [WS23xx] that I > set on this way: > > [WS23xx] > # This section is for the La Crosse WS-2300 series of weather stations. > > # Serial port such as /dev/ttyS0, /dev/ttyUSB0, or /dev/cuaU0 > port = /dev/ttyUSB0 > > # The station model, e.g., 'LaCrosse WS2317' or 'TFA Primus' > model = LaCrosse WS2300 > > # The driver to use: > driver = weewx.drivers.ws23xx > > Some suggestion? Thanks in advance to all! > > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
