http://weewx.com/docs/hardware.htm#ws28xx_pairing
On Tuesday, 11 July 2017 07:08:13 UTC+3, Dan Blanchard wrote: > GOAL: Install and run WeeWX on a *Raspberry Pi Zero W* with a *LaCrosse > WS-2813U* and upload to *Weather Underground*. > > OK, I've spent every night the past week trying to get WeeWX to run with > no luck so I am turning here for some expert help. I've been all over this > forum and cannot find what I am looking for. I believe that I have it > properly installed per the instructions at weeWX: Installation on > Debian-based systems <http://www.weewx.com/docs/debian.htm> but I cannot > figure out how to synchronize the LaCrosse transmitter and receiver. I > know they work because I have been using them on my PC based system running > Heavy Weather software which has a synchronization feature in the software. > This install is on a Raspberry Pi Zero W. > > I understand how to edit the config files but cannot find instructions on > how to access the charts and graphs either. But I assume they will not > show up until my Tx and Rx are communicating. Will someone be kind enough > to point me to the 'extensive' instructions on how to tell my Tx and Rx to > synchronize? > > Once I get it running, I will want to know how to upload to Weather > Underground so I can keep my station working. I haven't found good > instruction on that either. I think I just don't know enough about Linux > to 'read between the lines' in the provided instructions. > > Thanks for any help. > > Dan > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
