Dan, Check the stations altitude in weewx.conf The units must be foot and not feet.
Luc On Thursday, 13 July 2017 12:45:53 UTC-3, Dan Blanchard wrote: > > I see a syslog and a syslog1 which I have attached both. Will this help? > > On Thursday, July 13, 2017 at 8:30:59 AM UTC-7, Andrew Milner wrote: >> >> If you have a separate weewx log then that one - else syslog >> >> >> >> On Thursday, 13 July 2017 18:27:00 UTC+3, Dan Blanchard wrote: >> >>> Andrew, I understand your point and meant to send the log but got >>> wrapped up in thinking it was working last night. Which log are you asking >>> for? There are several logs at /var/log >>> >>> On Wednesday, July 12, 2017 at 10:31:17 PM UTC-7, Andrew Milner wrote: >>>> >>>> As Matthew said in his post - attaching the log from just before >>>> start-up of weewx would help us all to know exactly what is happening, and >>>> what (if any) error messages you are receiving. >>>> >>>> If the log by itself does not provide all the information you may need >>>> to stop weewx, set debug=1 in weewx.conf, restart weewx and get additional >>>> debug information. >>>> >>>> Trying to help without seeing the log is a little bit like looking for >>>> a needle in a haystack - virtually impossible!! >>>> >>>> The log is usually key to all problems, and seeing the log through the >>>> whole start-up process up to the end of the first archive period usually >>>> sheds some light on problems and issues in most situations. Remember - >>>> the >>>> log is the key!! >>>> >>>> >>>> >>>> >>>> >>>> On Thursday, 13 July 2017 08:09:45 UTC+3, Dan Blanchard wrote: >>>> >>>>> Further to this issue, I found that if I type sudo wee_device --info then >>>>> press the [Set] button on my station, the Tx and Rx start communicating >>>>> again for a few minutes. But I can't seem to keep them connected. >>>>> >>>>> Is there some trick to keep them paired once I finally get them >>>>> paired? I'm going to leave it on overnight and see what happens. >>>>> >>>>> >>>>> >>>>> >>>>> On Wednesday, July 12, 2017 at 9:06:27 PM UTC-7, Dan Blanchard wrote: >>>>>> >>>>>> Thanks for the info Gary, that was the problem, I got it to pair, but >>>>>> then in un-paired after about 2-3 minutes. Any thoughts there? >>>>>> >>>>>> >>>>>> >>>>>> On Wednesday, July 12, 2017 at 5:57:05 PM UTC-7, gjr80 wrote: >>>>>>> >>>>>>> On Thursday, 13 July 2017 10:28:36 UTC+10, Dan Blanchard wrote: >>>>>>>> >>>>>>>> usb.USBError: error sending control message: Operation not >>>>>>>> permitted >>>>>>>> >>>>>>> >>>>>>> Hi, >>>>>>> >>>>>>> Sounds like a permission issue, try prefixing the command with sudo: >>>>>>> >>>>>>> $ sudo wee_device --pair >>>>>>> >>>>>>> Gary >>>>>>> >>>>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
