I'm new to the software so have a few queries about it.
- Running on Raspbian on a Raspberry Pi
- Using the "wh23xx" driver for Tycon TP2700WC Support (Rebranded Fine
Offset WH2310)
I've installed fine and had the simulator running. All looks good so far.
When I reboot my Pi if the weather station is not connected I see the
following in the syslog
wh23xx: Cannot find USB device with VendorID=0x10c4 ProductID=0x8468
import of driver failed: Unable to find station on USB (<class
'weewx.WeeWxIOError'>)
engine: Unable to load driver: Unable to find station on USB
**** Exiting...
I then notice that Weewx is no longer running.
So my questions...
Does the weather station need to be connected at the time of boot in order
for Weewx to run?
Will Weewx stop running if I disconnect my weather station at any point?
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
