On Wednesday, July 26, 2017 at 7:32:48 AM UTC-4, Ruben Navarro Huedo wrote: > > Is this the same with wmr300? > If...i disconnect and connect: > Does weewx continues running ? >
weewx should do this for *any* hardware, not just the wh23xx. > And.... are lost data recovered after 're connected? that depends on what you mean by 'lost data'. weewx cannot recover data from a corrupt sd card or bogus rf transmissions. if you mean 'data collected by the hardware while weewx was not running', the answer is yes, but only if the hardware has a logger and the driver can read data from the logger. in the case of wmr300, there is a logger, and the weewx-wmr300 driver knows how to read the logged data. so if you disconnect the station's usb cable while weewx is running, then reconnect later, weewx should read the logged data since the time that the usb cable was disconnected. m -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
