Plug the station in, then try the command dmesg. It will show the port the USB device was attached to. Should look something like:
[20065.643632] usb 2-2: new full-speed USB device number 7 using xhci_hcd [20065.772251] usb 2-2: New USB device found, idVendor=05ad, idProduct=0fba [20065.772257] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [20065.772260] usb 2-2: Product: USB-Serial Controller [20065.772263] usb 2-2: Manufacturer: Prolific Technology Inc. [20065.772764] pl2303 2-2:1.0: pl2303 converter detected [20065.775446] usb 2-2: pl2303 converter now attached to ttyUSB0 -tk On Sun, Sep 17, 2017 at 10:22 AM, Joe Percival <[email protected]> wrote: > Trying to check connection to vantage pro 2 USB but I have no file > /dev/ttyUSB0, nor anything similar. > I'm running ubuntu 16.04 LTS on an Azulle Byte Plus. > Station is on and plugged into the USB 2.0 port and some other things are > plugged into a hub on one of the USB 3.0 ports. > Any idea what I may have done wrong? > > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
