The command lsusb will tell you what devices are on the bus, but it will not tell you which port (if any) they have been mapped to.
Sounds like the cp210x driver module is not getting loaded or does not exist on your system. It's the driver needed for a USB device on the bus to be treated as a serial device. To see if it exists, look in /lib/modules and subdirectories. A command line find /lib/modules -type f -name "*.ko"|grep cp21 will get you started. If you can find it, then you can load it: sudo modprobe cp210x -tk On Sun, Sep 17, 2017 at 12:11 PM, Joe Percival <[email protected]> wrote: > Not osmosis... lsmod 😜 > > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
