I have the 01525 and after 1 year the outside temp(always)reads -40 even when its near 80F. All other readings in or outside are good; rain, wind etc. I reset to factory defaults, replaced both sender and receiver batteries. Anybody have any ideas other than buying a new sender?
Thanks, cari On Wednesday, April 12, 2017 at 12:33:38 PM UTC-4, Tony Turner wrote: > I have an Acurite 01525A1 connected by USB to an OrangePI ONE running > Armbian Ubuntu Xenial and weewx v3.6.2. When the weather is cloudy the > temperature seems to be relatively accurate compared to my old weather > station and other stations close to me. But on really sunny days when the > sun comes up over the trees (around 2 pm) my temperature starts to read > high, it varies but lets say 6 to 8 degrees. I mounted it according to > Acurite's instructions... 5 feet above the ground in a location that is > clear of trees and other obstructions. I assume they intended for it to be > out in the open where rain and wind will not be blocked. Anyway, it's > impossible to know if the crazy little fan is working since I'm always at > work when it messes up. I notice it because weather underground takes it > down because of inaccurate date (I assume that's why it stops appearing on > their map). Is there a way to correct this? Maybe based on the UV from the > solar cell? Does anyone else have this issue? > > Thanks, > Tony > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
