Re vantage vue baud rate setting - from the manual: How to Display the Baud Rate To display the Baud Rate settings on a Vantage Pro or Vantage Pro2 console, make sure the data logger is installed and then continue using the following procedures: • Enter the console Setup Mode by pressing and holding DONE, then pressing the (-) key. • Use the BAR and DONE to scroll to the Baud Rate settings screen: Use the up (+) and down (-) arrows to change the Baud Rate setting, if needed. Press and hold DONE to return the console to the current weather mode. • Use the fastest Baud Rate your computer can handle. 19200 is the fastest Baud Rate available and is the default setting on the console. • Press DONE when you have the correct Baud Rate on the console screen.
To display the Baud Rate settings on a Vantage Vue console, make sure the data logger is installed and then continue using the following procedures: • Enter the console Setup Mode by pressing and holding DONE, then pressing the (-) key. 8 USB Hardware Installation • Press BAR to get to the Baud Rate settings screen: Use the up (+) and down (-) arrows to change the Baud Rate setting, if needed. Press and hold DONE to return the console to the current weather mode. • Use the fastest Baud Rate your computer can handle. 19200 is the fastest Baud Rate available and is the default setting on the console. • Press and hold DONE when you have the correct Baud Rate on the console screen Note: The data logger does not require a constant connection with a computer to continue logging and storing data. Although the data logger should remain connected to the console at all times, the data logger needs to be connected to the computer only when data is being downloaded or when the computer is actively using data from the data logger. The data logger and console can be disconnected from the computer if they are placed in a location where the data logger cable cannot reach. However, WeatherLink’s bulletin, summary, or other real-time window displays are accessible only if the data logger and console are connected to the computer. On Tuesday, 28 November 2017 12:46:57 UTC+2, Antony K. wrote: > Nov 28 09:25:34 raspberrypi wee_device[12649]: vantage: Archive memory cleared > Nov 28 09:25:55 raspberrypi weewx[12744]: engine: Initializing weewx version > 3.4.0 > Nov 28 09:25:55 raspberrypi weewx[12744]: engine: Using Python 2.7.3 > (default, Mar 18 2014, 05:13:23) #012[GCC 4.6.3] > Nov 28 09:25:55 raspberrypi weewx[12744]: engine: Platform > Linux-4.4.16-v7+-armv7l-with-debian-7.8 > Nov 28 09:25:55 raspberrypi weewx[12744]: engine: pid file is > /var/run/weewx.pid > Nov 28 09:25:55 raspberrypi weewx[12750]: engine: Using configuration file > /home/weewx/weewx.conf > Nov 28 09:25:55 raspberrypi weewx[12750]: engine: Loading station type > Vantage (weewx.drivers.vantage) > Nov 28 09:25:55 raspberrypi weewx[12750]: engine: StdConvert target unit is > 0x1 > Nov 28 09:25:55 raspberrypi weewx[12750]: engine: Archive will use data > binding wx_binding > Nov 28 09:25:55 raspberrypi weewx[12750]: engine: Record generation will be > attempted in 'hardware' > Nov 28 09:25:55 raspberrypi weewx[12750]: engine: Using archive interval of > 300 seconds > Nov 28 09:25:56 raspberrypi weewx[12750]: manager: Created and initialized > table 'archive' in database 'weewx.sdb' > Nov 28 09:25:56 raspberrypi weewx[12750]: manager: Created daily summary > tables > Nov 28 09:25:56 raspberrypi weewx[12750]: engine: Using binding 'wx_binding' > to database 'weewx.sdb' > Nov 28 09:25:56 raspberrypi weewx[12750]: engine: Starting backfill of daily > summaries > Nov 28 09:25:56 raspberrypi weewx[12750]: engine: Daily summaries up to date. > Nov 28 09:25:56 raspberrypi weewx[12750]: engine: Starting up weewx version > 3.4.0 > Nov 28 09:25:56 raspberrypi weewx[12750]: engine: Clock error is -154.87 > seconds (positive is fast) > Nov 28 09:25:57 raspberrypi weewx[12750]: vantage: Clock set to 2017-11-28 > 09:25:58 EET (1511853958) > Nov 28 09:25:58 raspberrypi weewx[12750]: engine: Starting main packet loop. > Nov 28 09:30:17 raspberrypi weewx[12750]: manager: added record 2017-11-28 > 09:30:00 EET (1511854200) to database 'weewx.sdb' > Nov 28 09:30:17 raspberrypi weewx[12750]: manager: added record 2017-11-28 > 09:30:00 EET (1511854200) to daily summary in 'weewx.sdb' > Nov 28 09:30:27 raspberrypi weewx[12750]: cheetahgenerator: Generated 17 > files for report StandardReport in 10.02 seconds > Nov 28 09:30:39 raspberrypi weewx[12750]: genimages: Generated 49 images for > StandardReport in 11.14 seconds > Nov 28 09:30:39 raspberrypi weewx[12750]: reportengine: copied 14 files to > /home/weewx/public_html > Nov 28 09:30:44 raspberrypi weewx[12750]: reportengine: ftp'd 1 files in 5.56 > seconds > > I have a USB logger. > > You won't believe what happening. > > After many trials and a long sleepless night while trying to solve the above > problem, I concluded this: > > *In the Vantage Vue console settings the Serial Baud Rate option does not > appear anywhere!* > > This is very strange. Also the Weewx program can not draw the data and the > errors can be seen in syslog file. > > I went back to firmware version 3.00 and all problems were solved. > > What can be happening with the firmware version 4.18? > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
