Ok ... I'll be back tomorrow Thanks / Yngve Den lördag 20 januari 2018 kl. 20:03:41 UTC+2 skrev mwall: > > yngve, > > what is the 'altitude' entered in your wmr300 console? > > please try the following: > > 1) stop weewx > > sudo /etc/init.d/weewx stop > > 2) ensure that the archive interval in weewx.conf is 300 seconds. the > archive interval of the wmr300 can be anything, but you might want to set > it to 5 minutes, just for consistency. > > 3) run the driver directly, and capture the output > > sudo PYTHONPATH=/usr/share/weewx python > /usr/share/weewx/weewx/drivers/wmr300.py --get-current > > /var/tmp/wmr300-driver-output.txt > > let that run for 30 or 40 minutes. then ctrl-c to quit. > > 4) run weewx directly, and capture the output > > sudo /usr/share/weewx/weewxd /etc/weewx/weewx.conf > > /var/tmp/wmr300-weewxd-output.txt > > let that run for 15 minutes. then crtl-c to quit. > > 5) start weewx as usual > > sudo /etc/init.d/weewx start > > 6) post the two output files (wmr300-driver-output.txt and > wmr300-weewxd-output.txt) > > this should tell us if there is a difference between pressure in > historical records and pressure in live packets. the driver output will > contain only live packets, the weewxd output should contain the historical > records and some live packets. > > m >
-- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
