Hello Cameron! Thank you for your dedication. Missing info at your weather station, for example, where you run the program from. It's very frustrating that the air pressure is not presented! As I note, however, the print information is retrieved from the sensor and stored during the weewx run, but then lost during the process and not sent further and becomes available for presentation. Other weather information appears to be present and presented without remark, even under "localhost, (barometer = N / A)". Let me mention that when i do the "*sudo /etc/init.d/weewx restart*" command, the air pressure is displayed once and then returns to no view.
*My system is:* -Water station Oregon WMR300 -cpu controls are "*RaspberryPi Model B Revision 2.0 512MB 000e*" with Raspbian -installed program is "*weewx_3.8.0-1_all.deb*" -Driver is "*wmr300.py version 0.19rc5*", the latest updated version that I found. I have tested all versions that I search and found online, but without positive results. My station is posted and can be seen in following places: https://www.pwsweather.com/obs/NORDENS.html https://www.awekas.at/en/instrument.php?id=14340#day https://www.wunderground.com/personal-weather-station/dashboard?ID=IKUMLING2#history *OK, action!* Switch computer from RaspberryPi to my desktop computer with Linux Mint18.3, run the same version of weewx and the files *weeewx.conf*, "*wmr300.py version 0.19rc5*" as for Raspberry. After some time, all values are displayed correctly, so even the air pressure! So, the issue of air pressure is related to RaspberryPi that conflicts with the WMR300! *Too bad* ... it would be useful to have RaspberryPi + WMR300 together as communication to the internet. / Yngve Den söndag 28 januari 2018 kl. 09:07:14 UTC+2 skrev Cameron D: > > If you look at my data from 16-Jan-2018, when the house lost power from > approx 7:00 until 10:00, you will see the same effect - history results > from the battery-backed console are logged on Wunderground at one-minute > intervals. > > On Sunday, 28 January 2018 16:21:36 UTC+10, Cameron D wrote: >> >> ...... >> I see this morning you presumably restarted weewx and loaded 1-minute >> interval history data from 6:40 to 9:54. Then again from 10:20 to 10:40. >> >> ... >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
