Andrew,
On 29 January 2018 at 22:19, Andrew Milner <[email protected]> wrote: I would suggest you have a proper plan on how to cope with a read only rpi > - or maybe even just run the rpi and weewx in a standard configuration > until you know how everything works - especially if you do not have a RTC > installed. > That is certainly good advice. ie:- get weewx working first. If you stop the installation before the readonly step you'll have a working raspian OS with weewx installed. It's all ready to go. i will add that note too, even though they are suffering 'signage blindness' as it is :-) Also make sure that you are not running the latest NTP software which I > believe has some form of buffering similar to fake hwclock - but not quite > as bad!! I saw someone mention this in a recent thread in this forum. > I'm intrigued by this but my googlefu might not be up to it, although I did find a reference by Gary to systemd-timesyncd <https://groups.google.com/forum/#%21msg/weewx-user/2zZOIBaUoKk/pPvyy8_KBAAJ;context-place=forum/weewx-user> possibly causing an issue. Would that be it? -- Cheers Glenn rorpi - read only raspberry pi & various weewx addons https://github.com/glennmckechnie -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
