Weathersnoop and WDisplay may ignore the logger, and just use the LOOP
packets.
WeeWX can do this too. Just set option 'record_generation' to 'software'.
You can find it in section [StdArchive] of weewx.conf. The downside is that
it cannot do automatic recovery after power failures, but it will get you
going.
[StdArchive]
# If the station hardware supports data logging then the archive
interval
# will be downloaded from the station. Otherwise, specify it (in
seconds).
archive_interval = 300
# If possible, new archive records are downloaded from the station
# hardware. If the hardware does not support this, then new archive
# records will be generated in software.
# Set the following to "software" to force software record generation.
record_generation = software
# Whether to include LOOP data in hi/low statistics
loop_hilo = True
# The data binding used to save archive records
data_binding = wx_binding
On Tue, Feb 20, 2018 at 2:28 PM, Pete Blakemore <[email protected]>
wrote:
> Hi, just tested and works with weathersnoop on mac and wdisplay on linux
> and they worked just fine, will call Davis and check out the logger
>
> Is there a known good config I could install on this server?
>
> Thanks
>
> Pete
>
> On Tuesday, 20 February 2018 20:58:47 UTC, Tom Keffer wrote:
>>
>> Thanks for that pre-emptive post! I was just going to ask you for the log
>> summary.
>>
>> There seems to be nothing in your logger. Make sure it's seated correctly
>> in the Vue.
>>
>> If that doesn't do it, give a call to Davis. It's rare, but they are
>> occasionally defective.
>>
>> -tk
>>
>>
>> On Tue, Feb 20, 2018 at 12:56 PM, Pete Blakemore <[email protected]>
>> wrote:
>>
>>> Also summary dump form station
>>>
>>> On Tuesday, 20 February 2018 20:29:15 UTC, Tom Keffer wrote:
>>>>
>>>> First, make sure another instance of weewx is not running.
>>>>
>>>> Then try it again, this time with debug=1. Then include the resultant
>>>> log.
>>>>
>>>> -tk
>>>>
>>>>
>>>>
>>>> On Tue, Feb 20, 2018 at 12:12 PM, Pete Blakemore <[email protected]>
>>>> wrote:
>>>>
>>>>> Tried removing batteries several times, reinstalling both weewx and
>>>>> the operating system, every combination from troubleshooting guide, the
>>>>> strange thing is that it's reading the logger because it posting to resful
>>>>> sites, just ignoring databases
>>>>>
>>>>> Thanks
>>>>>
>>>>> Pete
>>>>>
>>>>> On Tuesday, 20 February 2018 19:08:35 UTC, Tom Keffer wrote:
>>>>>>
>>>>>> Take a look at this troubleshooting section
>>>>>> <http://weewx.com/docs/usersguide.htm#html_generated_but_not_updated>
>>>>>> in the User's Guide and see if it helps. It does not fit your symptoms
>>>>>> exactly, but I suspect that's because you're having logger corruption
>>>>>> problems before even starting WeeWX up, rather than some time later.
>>>>>>
>>>>>> -tk
>>>>>>
>>>>>> On Tue, Feb 20, 2018 at 10:21 AM, Pete Blakemore <[email protected]
>>>>>> > wrote:
>>>>>>
>>>>>>> Hi
>>>>>>>
>>>>>>> I am running Weewx on Debian GNU/Linux 9 64-bit on a HP Microserver
>>>>>>> Intel® Celeron(R) CPU G1610T @ 2.30GHz × 2 with 16 GB memory
>>>>>>> I have Python 2.7.13 and have installed by adding repo as directed
>>>>>>> by User guide using apt. My weewx version is 3.8.0.
>>>>>>> It starts just fine and is talking to restful destinations
>>>>>>> wunderground etc and extracting data from Davis Vantage Vue, but it is
>>>>>>> not
>>>>>>> updating the database.
>>>>>>> I have also installed MySql database as well but it refuses to to
>>>>>>> populate this as well, tried everything I can think of! sqlite creates
>>>>>>> new
>>>>>>> database on start if I delete the old one
>>>>>>>
>>>>>>> Attached Wee_debg and syslog
>>>>>>>
>>>>>>> Any pointers greatfully received
>>>>>>>
>>>>>>> Thanks
>>>>>>>
>>>>>>> Pete
>>>>>>>
>>>>>>> --
>>>>>>> You received this message because you are subscribed to the Google
>>>>>>> Groups "weewx-user" group.
>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>> send an email to [email protected].
>>>>>>> For more options, visit https://groups.google.com/d/optout.
>>>>>>>
>>>>>>
>>>>>> --
>>>>> You received this message because you are subscribed to the Google
>>>>> Groups "weewx-user" group.
>>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>>> an email to [email protected].
>>>>> For more options, visit https://groups.google.com/d/optout.
>>>>>
>>>>
>>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "weewx-user" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to [email protected].
>>> For more options, visit https://groups.google.com/d/optout.
>>>
>>
>> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> For more options, visit https://groups.google.com/d/optout.
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
