*Hello,*
*Has been trying to get the "APRS WX Station with Raspberry Pi - Mitch
Ahrenstorff AD0HJ - 04/12/17" to work. The RTL433 part works and weewx
appears to be running but get the error "aprx: Failed to load anything from
beacon file /dev/shm/aprs.pkt". Also I can't see the html page that should
be in the "/home/weewx/public_html/index.html" that should be from my
station, all I see there is the Hood River, Oregon default page that came
with the download.*
*Looking at the aprx command line I do see traffic:*
sudo aprx -vvv
2018-03-14 00:04:32.256 aprx start - 2.9.0
2018-03-14 00:04:32.259 TTY /dev/serial0 opened
2018-03-14 00:04:42.718 CONNECT APRSIS rotate.aprs2.net:14580
3044 AL7IH-2 R WA5LNL-2>APTW01,WA5LNL-3*:!2931.67N/09838.36W_SAT/SOLAR
3091 AL7IH-2 R W5EX-1>APK101,WB5LJZ-5*,WX5II-11*,WA5LNL-3*,WIDE3*:W5EX
Mobile. EqpmtTemp=94F PS=14.9V
3096 AL7IH-2 R
W5EX-1>APK101,WB5LJZ-5*,WX5II-11*,WA5LNL-3*,WIDE3*:@000806h2918.84N/09926.69WE107/051/A=000915
3220 AL7IH-2 R K5HV>EM00KA,WB5LJZ-5*,WX5II-11*,WA5LNL-3*,WIDE3*:>EM00KA-
Kerrville, TX
3306 AL7IH-2 R
W5EX-1>APK101,WB5LJZ-5*,WX5II-11*,WA5LNL-3*,WIDE3*:@001136h2918.80N/09923.15WE088/054/A=000994
*Using the TNCPi add on board with a Pi3. My CWOP info also doesn't appear
to be publised either. Also have Xastir on this Pi and it works great. Any
help will be appreciated!!!! I've include my weewx.conf file as a txt
attachment.......Gary AL7IH*
*********** Here's my aprx.conf ************
mycall AL7IH-2
<aprsis>
passcode 19943
server rotate.aprs2.net
</aprsis>
<logging>
pidfile /var/run/aprx.pid
rflog /var/log/aprx/aprx-rf.log
aprxlog /var/log/aprx/aprx.log
</logging>
<interface>
serial-device /dev/serial0 19200 8n1 KISS
callsign AL7IH-2
tx-ok true
telem-to-is false
</interface>
<beacon>
beaconmode radio
cycle-size 5m
beacon srccall AL7IH via WIDE2-2 file "/dev/shm/aprs.pkt"
</beacon>
Here's the user.log where the error is at the bottom ***** Failed to load
anything from beacon file /dev/shm/aprs.pkt *********
Mar 13 19:07:01 TNCPi3 weewx[1208]: restx: StationRegistry: Registration
not requested.
Mar 13 19:07:01 TNCPi3 weewx[1208]: restx: Wunderground: Posting not
enabled.
Mar 13 19:07:01 TNCPi3 weewx[1208]: restx: PWSweather: Posting not enabled.
Mar 13 19:07:01 TNCPi3 weewx[1208]: restx: CWOP: Data for station FW2493
will be posted
Mar 13 19:07:01 TNCPi3 weewx[1208]: restx: WOW: Posting not enabled.
Mar 13 19:07:01 TNCPi3 weewx[1208]: restx: AWEKAS: Posting not enabled.
Mar 13 19:07:01 TNCPi3 weewx[1208]: engine: Starting up weewx version 3.8.0
Mar 13 19:07:01 TNCPi3 weewx[1208]: engine: Starting main packet loop.
Mar 13 19:07:01 TNCPi3 weewx[1208]: sdr: MainThread: err:
['usb_claim_interface error -6\n']
Mar 13 19:07:01 TNCPi3 weewx[1208]: sdr: MainThread: shutdown process
rtl_433 -q -U -F json -G
Mar 13 19:07:01 TNCPi3 weewx[1208]: engine: Caught WeeWxIOError: rtl_433
process is not running
Mar 13 19:07:01 TNCPi3 weewx[1208]: **** Waiting 60 seconds then
retrying...
Mar 13 19:08:01 TNCPi3 weewx[1208]: engine: retrying...
Mar 13 19:08:01 TNCPi3 weewx[1208]: engine: Using configuration file
/home/weewx/weewx.conf
Mar 13 19:08:01 TNCPi3 weewx[1208]: engine: Loading station type SDR
(user.sdr)
Mar 13 19:08:01 TNCPi3 weewx[1208]: sdr: MainThread: driver version is 0.39
Mar 13 19:08:01 TNCPi3 weewx[1208]: sdr: MainThread: sensor map is
{'windDir': 'wind_dir.08FA.Acurite5n1Packet', 'windSpeed':
'wind_speed.08FA.Acurite5n1Packet', 'outTemp':
'temperature.08FA.Acurite5n1Packet', 'outHumidity':
'humidity.08FA.Acurite5n1Packet', 'rain_total':
'rain_total.0BFA.Acurite5n1Packet', 'inTemp':
'temperature.24A4.AcuriteTowerPacket', 'inHumidity':
'humidity.24A4.AcuriteTowerPacket'}
Mar 13 19:08:01 TNCPi3 weewx[1208]: sdr: MainThread: deltas is {'strikes':
'strikes_total', 'rain': 'rain_total'}
Mar 13 19:08:01 TNCPi3 weewx[1208]: sdr: MainThread: startup process
'rtl_433 -q -U -F json -G'
Mar 13 19:08:01 TNCPi3 weewx[1208]: engine: StdConvert target unit is 0x1
Mar 13 19:08:01 TNCPi3 weewx[1208]: wxcalculate: The following values will
be calculated: barometer=prefer_hardware, windchill=prefer_hardware,
dewpoint=prefer_hardware, appTemp=prefer_hardware,
rainRate=prefer_hardware, windrun=prefer_hardware,
heatindex=prefer_hardware, maxSolarRad=prefer_hardware,
humidex=prefer_hardware, pressure=prefer_hardware,
inDewpoint=prefer_hardware, ET=prefer_hardware, altimeter=prefer_hardware,
cloudbase=prefer_hardware
Mar 13 19:08:01 TNCPi3 weewx[1208]: wxcalculate: The following algorithms
will be used for calculations: altimeter=aaNOAA, maxSolarRad=RS
Mar 13 19:08:01 TNCPi3 weewx[1208]: engine: Archive will use data binding
wx_binding
Mar 13 19:08:01 TNCPi3 weewx[1208]: engine: Record generation will be
attempted in 'hardware'
Mar 13 19:08:01 TNCPi3 weewx[1208]: engine: Using archive interval of 300
seconds (specified in weewx configuration)
Mar 13 19:08:01 TNCPi3 weewx[1208]: engine: Using binding 'wx_binding' to
database 'weewx.sdb'
Mar 13 19:08:01 TNCPi3 weewx[1208]: manager: Starting backfill of daily
summaries
Mar 13 19:08:01 TNCPi3 weewx[1208]: restx: StationRegistry: Registration
not requested.
Mar 13 19:08:01 TNCPi3 weewx[1208]: restx: Wunderground: Posting not
enabled.
Mar 13 19:08:01 TNCPi3 weewx[1208]: restx: PWSweather: Posting not enabled.
Mar 13 19:08:01 TNCPi3 weewx[1208]: restx: CWOP: Data for station FW2493
will be posted
Mar 13 19:08:01 TNCPi3 weewx[1208]: restx: WOW: Posting not enabled.
Mar 13 19:08:01 TNCPi3 weewx[1208]: restx: AWEKAS: Posting not enabled.
Mar 13 19:08:01 TNCPi3 weewx[1208]: engine: Starting up weewx version 3.8.0
Mar 13 19:08:01 TNCPi3 weewx[1208]: engine: Starting main packet loop.
Mar 13 19:09:52 TNCPi3 aprx: Failed to load anything from beacon file
/dev/shm/aprs.pkt
Mar 13 19:14:02 TNCPi3 aprx: Failed to load anything from beacon file
/dev/shm/aprs.pkt
-
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
# WEEWX CONFIGURATION FILE
#
# Copyright (c) 2009-2015 Tom Keffer <[email protected]>
# See the file LICENSE.txt for your rights.
##############################################################################
# This section is for general configuration information.
# Set to 1 for extra debug info, otherwise comment it out or set to zero
debug = 0
# Root directory of the weewx data file hierarchy for this station
WEEWX_ROOT = /home/weewx
# How long to wait before timing out a socket (FTP, HTTP) connection
socket_timeout = 20
# Do not modify this. It is used when installing and updating weewx.
version = 3.8.0
##############################################################################
# This section is for information about the station.
[Station]
# Description of the station location
location = "On the Medina River, Pipe Creek TX"
# Latitude and longitude in decimal degrees
latitude = 29.723
longitude = -98.935
# Altitude of the station, with unit it is in. This is downloaded from
# from the station if the hardware supports it.
altitude = 1200, foot # Choose 'foot' or 'meter' for unit
# Set to type of station hardware. There must be a corresponding stanza
# in this file with a 'driver' parameter indicating the driver to be used.
station_type = SDR
# If you have a website, you may specify an URL
#station_url = http://www.example.com
# The start of the rain year (1=January; 10=October, etc.). This is
# downloaded from the station if the hardware supports it.
rain_year_start = 1
# Start of week (0=Monday, 6=Sunday)
week_start = 6
##############################################################################
[AcuRite]
# This section is for AcuRite weather stations.
# The station model, e.g., 'AcuRite 01025' or 'AcuRite 02032C'
model = AcuRite 01035
# The driver to use:
driver = weewx.drivers.acurite
##############################################################################
[Simulator]
# This section is for the weewx weather station simulator
# The time (in seconds) between LOOP packets.
loop_interval = 2.5
# The simulator mode can be either 'simulator' or 'generator'.
# Real-time simulator. Sleep between each LOOP packet.
mode = simulator
# Generator. Emit LOOP packets as fast as possible (useful for testing).
#mode = generator
# The start time. Format is YYYY-mm-ddTHH:MM. If not specified, the default
# is to use the present time.
#start = 2011-01-01T00:00
# The driver to use:
driver = weewx.drivers.simulator
##############################################################################
# This section is for uploading data to Internet sites
[StdRESTful]
[[StationRegistry]]
# To register this weather station with weewx, set this to true
register_this_station = false
[[AWEKAS]]
# This section is for configuring posts to AWEKAS.
# If you wish to do this, set the option 'enable' to true,
# and specify a username and password.
enable = false
username = replace_me
# To guard against parsing errors, put your password in quotes:
password = replace_me
[[CWOP]]
# This section is for configuring posts to CWOP.
# If you wish to do this, set the option 'enable' to true,
# and specify the station ID (e.g., CW1234).
enable = true
station = FW2493
# If this is an APRS (radio amateur) station, uncomment
# the following and replace with a passcode (e.g., 12345).
passcode = 19943
[[PWSweather]]
# This section is for configuring posts to PWSweather.com.
# If you wish to do this, set the option 'enable' to true,
# and specify a station and password.
enable = false
station = replace_me
# To guard against parsing errors, put your password in quotes:
password = replace_me
[[WOW]]
# This section is for configuring posts to WOW.
# If you wish to do this, set the option 'enable' to true,
# and specify a station and password.
enable = false
station = replace_me
# To guard against parsing errors, put your password in quotes:
password = replace_me
[[Wunderground]]
# This section is for configuring posts to the Weather Underground.
# If you wish to do this, set the option 'enable' to true,
# and specify a station (e.g., 'KORHOODR3') and password.
enable = false
station = replace_me
# To guard against parsing errors, put your password in quotes:
password = replace_me
# Set the following to True to have weewx use the WU "Rapidfire"
# protocol. Not all hardware can support it. See the User's Guide.
rapidfire = False
##############################################################################
# This section specifies what reports, using which skins, to generate.
[StdReport]
# Where the skins reside, relative to WEEWX_ROOT
SKIN_ROOT = skins
# Where the generated reports should go, relative to WEEWX_ROOT
HTML_ROOT = public_html
# The database binding indicates which data should be used in reports.
data_binding = wx_binding
# Each of the following subsections defines a report that will be run.
[[StandardReport]]
# See the customizing guide to change the units, plot types and line
# colors, modify the fonts, display additional sensor data, and other
# customizations. Many of those changes can be made here by overriding
# parameters, or by modifying templates within the skin itself.
# The StandardReport uses the 'Standard' skin, which contains the
# images, templates and plots for the report.
skin = Standard
[[[Units]]]
[[[[Groups]]]]
group_altitude = foot
group_speed2 = mile_per_hour2
group_pressure = inHg
group_rain = inch
group_rainrate = inch_per_hour
group_temperature = degree_F
group_degree_day = degree_F_day
group_speed = mile_per_hour
[[FTP]]
# FTP'ing the results to a webserver is treated as just another report,
# albeit one with an unusual report generator!
skin = Ftp
# If you wish to use FTP, uncomment and fill out the next four lines.
#user = replace with the ftp username
#password = replace with the ftp password; put in quotes to guard
against parsing errors.
#server = replace with the ftp server name, e.g, www.threefools.org
#path = replace with the ftp destination directory (e.g., /weather)
# Set to True for an FTP over TLS (FTPS) connection. Not all servers
# support this.
secure_ftp = False
# To upload files from something other than what HTML_ROOT is set
# to above, specify a different HTML_ROOT here.
#HTML_ROOT = public_html
# Most FTP servers use port 21
port = 21
# Set to 1 to use passive mode, zero for active mode
passive = 1
[[RSYNC]]
# rsync'ing to a webserver is treated as just another report
skin = Rsync
# If you wish to use rsync, you must configure passwordless ssh using
# public/private key authentication from the user account that weewx
# runs as to the user account on the remote machine where the files
# will be copied.
#
# The following three lines determine where files will be sent.
#server = replace with the rsync server name, e.g, www.threefools.org
#path = replace with the rsync destination directory (e.g., /weather)
#user = replace with the rsync username
# Rsync can be configured to remove files from the remote server if
# they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you
# make a mistake in the remote path, you could could unintentionally
# cause unrelated files to be deleted. Set to 1 to enable remote file
# deletion, zero to allow files to accumulate remotely.
delete = 0
##############################################################################
# This service acts as a filter, converting the unit system coming from
# the hardware to a unit system in the database.
[StdConvert]
# The target_unit affects only the unit system in the database. Once
# chosen it cannot be changed without converting the entire database.
# Modification of target_unit after starting weewx will result in
# corrupt data - the database will contain a mix of US and METRIC data.
#
# The value of target_unit does not affect the unit system for
# reporting - reports can display US, Metric, or any combination of units.
#
# In most cases, target_unit should be left as the default: US
#
# In particular, those migrating from a standard wview installation
# should use US since that is what the wview database contains.
# DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING!
target_unit = US # Options are 'US', 'METRICWX', or 'METRIC'
##############################################################################
# This section can adjust data using calibration expressions.
[StdCalibrate]
[[Corrections]]
# For each type, an arbitrary calibration expression can be given.
# It should be in the units defined in the StdConvert section.
# Example:
foo = foo + 0.2
##############################################################################
# This section is for quality control checks. If units are not specified,
# values must be in the units defined in the StdConvert section.
[StdQC]
[[MinMax]]
barometer = 26, 32.5, inHg
outTemp = -40, 120, degree_F
inTemp = 10, 120, degree_F
outHumidity = 0, 100
inHumidity = 0, 100
windSpeed = 0, 120, mile_per_hour
pressure = 24, 34.5, inHg
##############################################################################
# This section controls the origin of derived values.
[StdWXCalculate]
[[Calculations]]
# Derived quantities are calculated by this service. Possible values
are:
# hardware - use the value provided by hardware
# software - use the value calculated by weewx
# prefer_hardware - use value provide by hardware if available,
# otherwise use value calculated by weewx
pressure = prefer_hardware
barometer = prefer_hardware
altimeter = prefer_hardware
windchill = prefer_hardware
heatindex = prefer_hardware
dewpoint = prefer_hardware
inDewpoint = prefer_hardware
rainRate = prefer_hardware
##############################################################################
# For hardware that supports it, this section controls how often the
# onboard clock gets updated.
[StdTimeSynch]
# How often to check the weather station clock for drift (in seconds)
clock_check = 14400
# How much it can drift before we will correct it (in seconds)
max_drift = 5
##############################################################################
# This section is for configuring the archive service.
[StdArchive]
# If the station hardware supports data logging then the archive interval
# will be downloaded from the station. Otherwise, specify it (in seconds).
archive_interval = 300
# If possible, new archive records are downloaded from the station
# hardware. If the hardware does not support this, then new archive
# records will be generated in software.
# Set the following to "software" to force software record generation.
record_generation = hardware
# Whether to include LOOP data in hi/low statistics
loop_hilo = True
# The data binding used to save archive records
data_binding = wx_binding
##############################################################################
# This section binds a data store to a database.
[DataBindings]
[[wx_binding]]
# The database must match one of the sections in [Databases].
# This is likely to be the only option you would want to change.
database = archive_sqlite
# The name of the table within the database
table_name = archive
# The manager handles aggregation of data for historical summaries
manager = weewx.wxmanager.WXDaySummaryManager
# The schema defines the structure of the database.
# It is *only* used when the database is created.
schema = schemas.wview.schema
##############################################################################
# This section defines various databases.
[Databases]
# A SQLite database is simply a single file
[[archive_sqlite]]
database_type = SQLite
database_name = weewx.sdb
# MySQL
[[archive_mysql]]
database_type = MySQL
database_name = weewx
##############################################################################
# This section defines defaults for the different types of databases.
[DatabaseTypes]
# Defaults for SQLite databases
[[SQLite]]
driver = weedb.sqlite
# Directory in which the database files are located
SQLITE_ROOT = %(WEEWX_ROOT)s/archive
# Defaults for MySQL databases
[[MySQL]]
driver = weedb.mysql
# The host where the database is located
host = localhost
# The user name for logging in to the host
user = weewx
# The password for the user name. Put in quotes to guard against
parsing errors.
password = weewx
##############################################################################
# This section configures the internal weewx engine.
[Engine]
[[Services]]
# This section specifies the services that should be run. They are
# grouped by type, and the order of services within each group
# determines the order in which the services will be run.
prep_services = weewx.engine.StdTimeSynch
data_services = ,
process_services = weewx.engine.StdConvert, weewx.engine.StdCalibrate,
weewx.engine.StdQC, weewx.wxservices.StdWXCalculate, user.aprs.APRS
archive_services = weewx.engine.StdArchive
restful_services = weewx.restx.StdStationRegistry,
weewx.restx.StdWunderground, weewx.restx.StdPWSweather, weewx.restx.StdCWOP,
weewx.restx.StdWOW, weewx.restx.StdAWEKAS
report_services = weewx.engine.StdPrint, weewx.engine.StdReport
##############################################################################
[SDR]
driver = user.sdr
cmd = rtl_433 -q -U -F json -G
path = /usr/local/bin/
[[sensor_map]]
windDir = wind_dir.08FA.Acurite5n1Packet
windSpeed = wind_speed.08FA.Acurite5n1Packet
outTemp = temperature.08FA.Acurite5n1Packet
outHumidity = humidity.08FA.Acurite5n1Packet
rain_total = rain_total.0BFA.Acurite5n1Packet
inTemp = temperature.24A4.AcuriteTowerPacket
inHumidity = humidity.24A4.AcuriteTowerPacket
##############################################################################
# Options for extension 'aprs'
[APRS]
comment = ""
include_position = 0
symbol_code = _
symbol_table = /
output_filename = /dev/shm/aprs.pkt
