Isn't this the same post as the one you made 12 hours ago?? Perhaps one of
them should be deleted!!
On Wednesday, 14 March 2018 17:47:45 UTC+2, Gary Rigdon wrote:
> *Hello,*
>
> *Has been trying to get the "APRS WX Station with Raspberry Pi - Mitch
> Ahrenstorff AD0HJ - 04/12/17" to work. The RTL433 part works and weewx
> appears to be running but get the error "aprx: Failed to load anything from
> beacon file /dev/shm/aprs.pkt". Also I can't see the html page that should
> be in the "/home/weewx/public_html/index.html" that should be from my
> station, all I see there is the Hood River, Oregon default page that came
> with the download.*
> *Looking at the aprx command line I do see traffic:*
> sudo aprx -vvv
> 2018-03-14 00:04:32.256 aprx start - 2.9.0
> 2018-03-14 00:04:32.259 TTY /dev/serial0 opened
> 2018-03-14 00:04:42.718 CONNECT APRSIS rotate.aprs2.net:14580
> 3044 AL7IH-2 R WA5LNL-2>APTW01,WA5LNL-3*:!2931.67N/09838.36W_SAT/SOLAR
> 3091 AL7IH-2 R W5EX-1>APK101,WB5LJZ-5*,WX5II-11*,WA5LNL-3*,WIDE3*:W5EX
> Mobile. EqpmtTemp=94F PS=14.9V
> 3096 AL7IH-2 R
> W5EX-1>APK101,WB5LJZ-5*,WX5II-11*,WA5LNL-3*,WIDE3*:@000806h2918.84N/09926.69WE107/051/A=000915
> 3220 AL7IH-2 R K5HV>EM00KA,WB5LJZ-5*,WX5II-11*,WA5LNL-3*,WIDE3*:>EM00KA-
> Kerrville, TX
> 3306 AL7IH-2 R
> W5EX-1>APK101,WB5LJZ-5*,WX5II-11*,WA5LNL-3*,WIDE3*:@001136h2918.80N/09923.15WE088/054/A=000994
>
>
> *Using the TNCPi add on board with a Pi3. My CWOP info also doesn't appear
> to be publised either. Also have Xastir on this Pi and it works great. Any
> help will be appreciated!!!! I've include my weewx.conf file as a txt
> attachment.......Gary AL7IH*
>
> *********** Here's my aprx.conf ************
>
> mycall AL7IH-2
>
> <aprsis>
> passcode 19943
> server rotate.aprs2.net
> </aprsis>
>
> <logging>
> pidfile /var/run/aprx.pid
> rflog /var/log/aprx/aprx-rf.log
> aprxlog /var/log/aprx/aprx.log
> </logging>
>
> <interface>
> serial-device /dev/serial0 19200 8n1 KISS
> callsign AL7IH-2
> tx-ok true
> telem-to-is false
> </interface>
>
> <beacon>
> beaconmode radio
> cycle-size 5m
> beacon srccall AL7IH via WIDE2-2 file "/dev/shm/aprs.pkt"
> </beacon>
>
>
> Here's the user.log where the error is at the bottom ***** Failed to load
> anything from beacon file /dev/shm/aprs.pkt *********
>
> Mar 13 19:07:01 TNCPi3 weewx[1208]: restx: StationRegistry: Registration
> not requested.
> Mar 13 19:07:01 TNCPi3 weewx[1208]: restx: Wunderground: Posting not
> enabled.
> Mar 13 19:07:01 TNCPi3 weewx[1208]: restx: PWSweather: Posting not enabled.
> Mar 13 19:07:01 TNCPi3 weewx[1208]: restx: CWOP: Data for station FW2493
> will be posted
> Mar 13 19:07:01 TNCPi3 weewx[1208]: restx: WOW: Posting not enabled.
> Mar 13 19:07:01 TNCPi3 weewx[1208]: restx: AWEKAS: Posting not enabled.
> Mar 13 19:07:01 TNCPi3 weewx[1208]: engine: Starting up weewx version 3.8.0
> Mar 13 19:07:01 TNCPi3 weewx[1208]: engine: Starting main packet loop.
> Mar 13 19:07:01 TNCPi3 weewx[1208]: sdr: MainThread: err:
> ['usb_claim_interface error -6\n']
> Mar 13 19:07:01 TNCPi3 weewx[1208]: sdr: MainThread: shutdown process
> rtl_433 -q -U -F json -G
> Mar 13 19:07:01 TNCPi3 weewx[1208]: engine: Caught WeeWxIOError: rtl_433
> process is not running
> Mar 13 19:07:01 TNCPi3 weewx[1208]: **** Waiting 60 seconds then
> retrying...
> Mar 13 19:08:01 TNCPi3 weewx[1208]: engine: retrying...
> Mar 13 19:08:01 TNCPi3 weewx[1208]: engine: Using configuration file
> /home/weewx/weewx.conf
> Mar 13 19:08:01 TNCPi3 weewx[1208]: engine: Loading station type SDR
> (user.sdr)
> Mar 13 19:08:01 TNCPi3 weewx[1208]: sdr: MainThread: driver version is 0.39
> Mar 13 19:08:01 TNCPi3 weewx[1208]: sdr: MainThread: sensor map is
> {'windDir': 'wind_dir.08FA.Acurite5n1Packet', 'windSpeed':
> 'wind_speed.08FA.Acurite5n1Packet', 'outTemp':
> 'temperature.08FA.Acurite5n1Packet', 'outHumidity':
> 'humidity.08FA.Acurite5n1Packet', 'rain_total':
> 'rain_total.0BFA.Acurite5n1Packet', 'inTemp':
> 'temperature.24A4.AcuriteTowerPacket', 'inHumidity':
> 'humidity.24A4.AcuriteTowerPacket'}
> Mar 13 19:08:01 TNCPi3 weewx[1208]: sdr: MainThread: deltas is {'strikes':
> 'strikes_total', 'rain': 'rain_total'}
> Mar 13 19:08:01 TNCPi3 weewx[1208]: sdr: MainThread: startup process
> 'rtl_433 -q -U -F json -G'
> Mar 13 19:08:01 TNCPi3 weewx[1208]: engine: StdConvert target unit is 0x1
> Mar 13 19:08:01 TNCPi3 weewx[1208]: wxcalculate: The following values will
> be calculated: barometer=prefer_hardware, windchill=prefer_hardware,
> dewpoint=prefer_hardware, appTemp=prefer_hardware,
> rainRate=prefer_hardware, windrun=prefer_hardware,
> heatindex=prefer_hardware, maxSolarRad=prefer_hardware,
> humidex=prefer_hardware, pressure=prefer_hardware,
> inDewpoint=prefer_hardware, ET=prefer_hardware, altimeter=prefer_hardware,
> cloudbase=prefer_hardware
> Mar 13 19:08:01 TNCPi3 weewx[1208]: wxcalculate: The following algorithms
> will be used for calculations: altimeter=aaNOAA, maxSolarRad=RS
> Mar 13 19:08:01 TNCPi3 weewx[1208]: engine: Archive will use data binding
> wx_binding
> Mar 13 19:08:01 TNCPi3 weewx[1208]: engine: Record generation will be
> attempted in 'hardware'
> Mar 13 19:08:01 TNCPi3 weewx[1208]: engine: Using archive interval of 300
> seconds (specified in weewx configuration)
> Mar 13 19:08:01 TNCPi3 weewx[1208]: engine: Using binding 'wx_binding' to
> database 'weewx.sdb'
> Mar 13 19:08:01 TNCPi3 weewx[1208]: manager: Starting backfill of daily
> summaries
> Mar 13 19:08:01 TNCPi3 weewx[1208]: restx: StationRegistry: Registration
> not requested.
> Mar 13 19:08:01 TNCPi3 weewx[1208]: restx: Wunderground: Posting not
> enabled.
> Mar 13 19:08:01 TNCPi3 weewx[1208]: restx: PWSweather: Posting not enabled.
> Mar 13 19:08:01 TNCPi3 weewx[1208]: restx: CWOP: Data for station FW2493
> will be posted
> Mar 13 19:08:01 TNCPi3 weewx[1208]: restx: WOW: Posting not enabled.
> Mar 13 19:08:01 TNCPi3 weewx[1208]: restx: AWEKAS: Posting not enabled.
> Mar 13 19:08:01 TNCPi3 weewx[1208]: engine: Starting up weewx version 3.8.0
> Mar 13 19:08:01 TNCPi3 weewx[1208]: engine: Starting main packet loop.
> Mar 13 19:09:52 TNCPi3 aprx: Failed to load anything from beacon file
> /dev/shm/aprs.pkt
> Mar 13 19:14:02 TNCPi3 aprx: Failed to load anything from beacon file
> /dev/shm/aprs.pkt
>
>
>
>
>
>
> -
>
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
