Yes is it the ip mask address of my home network. The weather station console and computer on which WeeWX runs (Raspberry Pi 3) are both connected to this network. I am not sure if it will work when a remote location is involved but I will defer to Aussie Susan to give the definitive answer on this one.
On Thursday, 19 April 2018 09:05:33 UTC+1, Damjan Hajsek wrote: > > I will try, thank you. > That IP address is that IP from computer where weewx is installed? > Because I have weewx installed on other location and have public IP. > > > Dne četrtek, 19. april 2018 09.41.16 UTC+2 je oseba Ian Millard napisala: >> >> Have you configured your IP address mask in the HP1000 section of the >> config file? >> >> Here is my setup: - >> >> [HP1000] >> # This section is for the weewx HP1000 weather station driver >> >> # The IP address mask to search for a weather station >> # Define this if you DO NOT have the 'netifaces' Python >> # package installed on your computer or you want to >> # force the driver to use a specific broadcase address >> ip_address_mask = 192.168.1.255 >> >> # The retry count for getting a response from the weather station >> retry_count = 5 >> >> # Socket timeout value (seconds) >> socket_timeout = 5 >> >> # Loop delay time (seconds) >> # None or not specified means loop packets are generated as fast as >> possible >> # (approx every few seconds) and will increase network traffic volume >> loop_delay = 15 >> >> # Number of times to try to access the network >> max_retry = 3 >> >> # Number of seconds to wait between attempts to access the network >> retry_wait = 5 >> >> # The driver to use: >> driver = user.HP1000 >> >> On Thursday, 19 April 2018 07:45:12 UTC+1, Damjan Hajsek wrote: >>> >>> Yes I see now sorry forget to reconfigure. >>> I also didn't have HP1000 driver so I downloaded it, install it and >>> reconfigure it. >>> but now It doesn't work I get this error. >>> localhost weewx[21212]: HP1000: Timed out too many times >>> >>> >>> Dne četrtek, 19. april 2018 04.39.36 UTC+2 je oseba [email protected] >>> napisala: >>>> >>>> That indicates that you have not followed the instructions for >>>> installing the driver and configuring the 'weewx.conf' file. >>>> Susan >>>> >>>> On Thursday, April 19, 2018 at 4:38:24 AM UTC+10, Damjan Hajsek wrote: >>>>> >>>>> I also tried HP1000 driver as it was suggested by some use, but get >>>>> this error. >>>>> >>>>> Apr 18 20:31:49 localhost weewx[593]: engine: Caught unrecoverable >>>>> exception in engine: >>>>> Apr 18 20:31:49 localhost weewx[593]: **** No module named HP1000 >>>>> Apr 18 20:31:49 localhost weewx[593]: **** Traceback (most recent >>>>> call last): >>>>> Apr 18 20:31:49 localhost weewx[593]: **** File >>>>> "/usr/share/weewx/weewx/engine.py", line 865, in main >>>>> Apr 18 20:31:49 localhost weewx[593]: **** engine = >>>>> engine_class(config_dict) >>>>> Apr 18 20:31:49 localhost weewx[593]: **** File >>>>> "/usr/share/weewx/weewx/engine.py", line 71, in __init__ >>>>> Apr 18 20:31:49 localhost weewx[593]: **** >>>>> self.setupStation(config_dict) >>>>> Apr 18 20:31:49 localhost weewx[593]: **** File >>>>> "/usr/share/weewx/weewx/engine.py", line 95, in setupStation >>>>> Apr 18 20:31:49 localhost weewx[593]: **** __import__(driver) >>>>> Apr 18 20:31:49 localhost weewx[593]: **** ImportError: No module >>>>> named HP1000 >>>>> Apr 18 20:31:49 localhost weewx[593]: **** Exiting. >>>>> >>>>> >>>>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
