You've said you have just started weewx in the past few minutes!! The time is taken from start of weewx!!
just attach the complete log file as a file to your posting On Tuesday, 15 May 2018 06:18:59 UTC+3, Mark Roberts wrote: > > the snippet you got was the whole screen. there's not more. if you give > me a command I can get you more. > > I haven't been online in 13 days. so I think I've waited long enough! > > I hate stuff like this - the power was off for a couple of hours and what > had been working perfectly and smoothly is now not working at all. grrr! > > On Monday, May 14, 2018 at 10:13:54 PM UTC-5, Andrew Milner wrote: >> >> Posting only occurs at archive intervals - which was the reason for the >> other questions!! >> >> Maybe you have not waited long enough >> >> Without a full log from start of weewx thru to at least 2 archive >> intervals it is hard to diagnose anything more >> >> The log snippet you did post showed nothing obviously wrong, but the >> snippet was far far too short to be very useful. >> >> >> >> On Tuesday, 15 May 2018 06:10:38 UTC+3, Mark Roberts wrote: >>> >>> it's not posting the data to WX Underground. I'm offline. WX >>> Underground says "this PWS is not reporting." >>> >>> On Monday, May 14, 2018 at 10:06:46 PM UTC-5, Andrew Milner wrote: >>>> >>>> the log output, as far as it went, looks perfectly ok to me - and as >>>> may be expected. >>>> >>>> data should be being posted to wunderground - so not sure what you mean >>>> when you say data is not being posted! where is it not 'posting' to?? >>>> what do you mean when you say it is not being posted?? >>>> >>>> The log snippet was not long enough to see what happened at your next >>>> archive interval ie next posting occasion, and the snippet did not say >>>> what >>>> your archive interval was either as the snippet started too late in the >>>> startup sequence!!! >>>> >>>> >>>> >>>> >>>> On Tuesday, 15 May 2018 06:00:58 UTC+3, Mark Roberts wrote: >>>>> >>>>> you don't want to know! ha! ran the command to see the log and I >>>>> think I know why it's not posting. posting isn't enabled... >>>>> >>>>> pi@raspberrypi:~ $ sudo tail -f /var/log/syslog >>>>> May 14 21:52:29 raspberrypi weewx[20789]: restx: StationRegistry: >>>>> Station will not be registered: no station_url specified. >>>>> May 14 21:52:29 raspberrypi weewx[20789]: restx: Wunderground-PWS: >>>>> Data for station KTXBEDFO19 will be posted >>>>> May 14 21:52:29 raspberrypi weewx[20789]: restx: PWSweather: Posting >>>>> not enabled. >>>>> May 14 21:52:29 raspberrypi weewx[20789]: restx: CWOP: Posting not >>>>> enabled. >>>>> May 14 21:52:29 raspberrypi weewx[20789]: restx: WOW: Posting not >>>>> enabled. >>>>> May 14 21:52:29 raspberrypi weewx[20789]: restx: AWEKAS: Posting not >>>>> enabled. >>>>> May 14 21:52:29 raspberrypi weewx[20789]: engine: Starting up weewx >>>>> version 3.8.0 >>>>> May 14 21:52:29 raspberrypi weewx[20789]: engine: Clock error is 2.05 >>>>> seconds (positive is fast) >>>>> May 14 21:52:30 raspberrypi weewx[20789]: engine: Starting main packet >>>>> loop. >>>>> May 14 21:57:56 raspberrypi weewx[20789]: vantage: LOOP try #1; error: >>>>> Expected to read 99 chars; got 85 instead >>>>> >>>>> >>>>> On Monday, May 14, 2018 at 9:56:03 PM UTC-5, Andrew Milner wrote: >>>>>> >>>>>> the user guide says >>>>>> sudo weewxd weewx.conf >>>>>> >>>>>> what error do you get? >>>>>> >>>>>> >>>>>> >>>>>> On Tuesday, 15 May 2018 05:50:23 UTC+3, Andrew Milner wrote: >>>>>>> >>>>>>> ok - so you have found the command line, and you have started the >>>>>>> weewx daemon >>>>>>> >>>>>>> there should be no more output to the screen from weewx when it is >>>>>>> running as a daemon. >>>>>>> >>>>>>> there will be entries in the log though. >>>>>>> >>>>>>> if you want to see weewx output on the screen >>>>>>> 1. stop weewx with sudo /etc/init.d/weewx stop >>>>>>> 2. run weewx from the command line >>>>>>> >>>>>>> >>>>>>> >>>>>>> On Tuesday, 15 May 2018 05:43:52 UTC+3, Mark Roberts wrote: >>>>>>>> >>>>>>>> I think you're right - I need some serious linux work. I thought >>>>>>>>> maybe this was a lot simpler than it is - was hoping for a "type this >>>>>>>>> and >>>>>>>>> it'll run" kinda thing. LOL >>>>>>>>> >>>>>>>> >>>>>>>> this command >>>>>>>> >>>>>>>> sudo ls /usr/share/weewx >>>>>>>> >>>>>>>> got me a file listing of some daemon stuff and a bunch of weewx >>>>>>>> stuff. >>>>>>>> >>>>>>>> I guess that's good but I don't know what to do next. >>>>>>>> >>>>>>>> I ran this command (after reading the docs for the 50th time) >>>>>>>> >>>>>>>> sudo /etc/init.d/weewx start >>>>>>>> >>>>>>>> and it says "starting weewx service." >>>>>>>> >>>>>>>> doesn't seem like it's coming back online though. >>>>>>>> >>>>>>>> thanks everyone for all their help! >>>>>>>> >>>>>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
