PS -> Tony - the sw you are using is called weeWX rather than weeRX!!
On Monday, 21 May 2018 08:48:02 UTC+3, gjr80 wrote: > > Hi, > > The lack of pressure data is likely due to weeWX not sending it. There are > 3 'pressures' used within weeWX; station pressure, barometric pressure and > altimeter pressure. You can read about these in the wiki ( > https://github.com/weewx/weewx/wiki/Barometer,-pressure,-and-altimeter). > Provided weeWX has one of the pressures the other two can be calculated. > > I believe that AcuRite stations provide station pressure or weeWX field > pressure. WU requires barometric pressure or weeWX field barometer. To > calculate barometric pressure the temperature from 12 hours ago is > required, otherwise the barometer file is set to None. Since you have only > just setup your station I suspect you don't yet have 12 hours of data and > hence the temperature from 12 hours ago does not yet exist and barometer > will be set to None. If barometer is None weeWX does no send any barometer > data to WU. You should see data appear in WU 12 hours after you started > your system, I would give it 24 hours and if nothing is there then provide > the detail as sought by Andrew but I would set debug=2 in weewx.conf before > starting weeWX. This will let use see in the log what data is posted to WU. > > You could also run weeWX directly ( > http://weewx.com/docs/usersguide.htm#Running_directly) and take note of > which of the 'pressures' have a value and which are None. > > Gary > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
