Iss, have a look at the following https://www.modmypi.com/raspberry-pi/accessories-198/real-time-clocks-rtc-1080/rasclock-raspberry-pi-real-time-clock-module-v3.0
On 23 May 2018 at 13:54, <[email protected]> wrote: > I am running WeeWX on a Raspberry Pi 3 connected to a Vantage Pro2 Station. > > If I power down the Pi, when I power it back up the time on the Vantage > Pro is incorrect and is set to the time the Pi was powered down. > > This, I assume, is due to the fact the Pi does not have a RTC and gets its > time from the network. > I also assume that WeeWX is starting before the network is up. > > What is the best way to get the correct time to the Vantage > > > Thanks > > > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
