I was hoping for a simple software solution like inserting a delay into the WeeWX startup routine to give the Pi time to Gert the correct time
John On Wednesday, May 23, 2018 at 2:25:45 PM UTC+1, Andrew Milner wrote: > > The simplest, easiest and best way is to get a RTC module for the RPi. > Cost is under £10. Removes all the hassel of the RPi not having the > correct time. weewx tries to wait for time to have been set as best it can. > > See the wiki for more information on running weewx with an RPi > https://github.com/weewx/weewx/wiki/Raspberry-Pi > > > > > On Wednesday, 23 May 2018 15:54:09 UTC+3, iss....@gmail.com wrote: >> >> I am running WeeWX on a Raspberry Pi 3 connected to a Vantage Pro2 >> Station. >> >> If I power down the Pi, when I power it back up the time on the Vantage >> Pro is incorrect and is set to the time the Pi was powered down. >> >> This, I assume, is due to the fact the Pi does not have a RTC and gets >> its time from the network. >> I also assume that WeeWX is starting before the network is up. >> >> What is the best way to get the correct time to the Vantage >> >> >> Thanks >> >> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
