Thanks. That log is very helpful. Your data logger is definitely not working correctly.
Try pulling the logger out, then reseating it. Occasionally that works. If that doesn't work, and you've already tried power cycling it (make sure you unplug it as well as take the batteries out), then you'll need to talk to Davis. -tk On Tue, Oct 16, 2018 at 2:27 PM <[email protected]> wrote: > Sirs, > > Thank you for your comments. I agree that I don't think it is a port > problem. > In answer to you questions/suggestions. I set debug=1 in weewx.conf before > I sent my initial email. I tested the data logger with "screen". I entered > TEST and the CR, it responded with TEXT. Indicating that weewx was talking > to the data logger. I also took the batteries out of the data logger...to > reset memory. > > I was worried that some how I installed thing improperly. So I removed > everything (via synaptic) and deleted the DB in /var/lib/weewx. Changed the > permission on my user account to administrator and reinstalled weewx. I > restarted system. After a hour or so I checked the html files. They looked > the same as before. The only data showing was barometer and inside > temperature. Also the date shows as 10/05/2018 04:00:00 PM. Same as before. > > I am beginning to think my Davis Data Logger is not working right. I have > included a more thorough log and copy of index.html. > > All suggestions are welcome. > > Regards, > Dick > > On Monday, October 15, 2018 at 2:13:54 PM UTC-7, vince wrote: >> >> On Monday, October 15, 2018 at 11:53:14 AM UTC-7, [email protected] >> wrote: >>> >>> I have a Davis Vantage Pro 2 system. Originally on Windows 10 working no >>> problem. I have thrown out Windows and did a clean install of Ubuntu 18.04 >>> Mate. I installed weewx v3.8.2 per instructions from 'weeWX: Installation >>> on Debian-base systems" i.e apt-get install weewx. I also installed Python >>> 2.1.15. I set up weewx.conf for Davis Weatherlink Data Logger >>> (6510USB)....'Vantge'. I used ttyUSB0. On starting system it generated html >>> files but almost all the data is missing. I reset and cleaned out data on >>> data logger (removed batteries etc.) I then restarted everything. Same >>> problem on data. I tested to see if Ubuntu was looking at ttyUSB0. As far >>> as I could tell it was talking to ttyUSB0. Ihave been trying things for >>> about one week but am unable to see what is wrong. Any suggestions on what >>> to try next is appreciated. >>> >>> >>> >> There's basically nothing in the 'very' short log snippets you posted >> that can help us. >> >> At a minimum, set debug=1 in weewx.conf and restart weewx. You might >> want to compare /var/log/messages and /var/log/syslog contents, it's >> possible you're not checking the right file for log messages. >> >> You might also run "lsusb" to see what port your station is on, and also >> verify that you have "port = /dev/ttyUSB0" in weewx.conf, and not a bare >> 'ttyUSB0'. >> >> > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
