Hello I see you have already started a thread with your problem, but lest the casual viewer get thrown off track, your problems are not at all what is happening to Dick. His problem is clearly with the logger, while your Acurite doesn't even have a logger.
-tk On Tue, Oct 16, 2018 at 4:04 PM CCOR58 <[email protected]> wrote: > I have run into similar occurrences and usually getting emails from > AWEKAS that stale data has occurred when it happens. > > I have weewx set to put new latest generated web page on a localhost > webserver in the quoted /var/www/ folder regime as well as ftp it to my > public web page. I use separate Weatherunderground, and NOAA/CWOP and > AWEKAS reports as well. > > I have a separate bookmark for each and use it to compare the local > copy to the www web site copy to ensure updated time is indicated as > well as full complement of data on each new report update. > > I have trried all the same removals and installs/re-installs as you > describe with similar results. I too am running a ubuntu version of > linux 18.04 with all latest updates. > > The most success has been with logging in to the mysql database as root > or my own user id which is admin level and after doing a sudo halt to > weewx dropping the entire database named weewx but retaining the weewx > user. then using synaptic re-install weewx, replace the weewx.conf file > with a backup copy of the previous workin version and do a sudo reload > and restart of weewx. It does regenerate a new database and seems to > continue on from there. > > The same success occurs if I log into phpmyadmin and just drop all > weewx data tables retaining an empty weewx database. The reinstall > seems to regenerate the database and/or tables from scratch. > > However, one does lose previous database historical data. I have not > attempted to try an amend previous data because it seems once the > database is regenerated it all begins to work and I am not desirous of > re-introducing the error in the database that may be the cause of the > trouble. > > My system is an acurite 5 sensor unit and I have run it at report > intervals of 300, 600, 1200 & 1800 without difficulty to the interior > display unit at least. > > I am in a rural area and high speed internet service is very poor. > Upload bandwidth/speeds are throttled at 1 Mbps. Running the visibility > web cam stream uses that up quickly and that immediately runs latencies > into 1000's of ms. > > I managed to get a slightly impoved connection at extra cost to ensure > uploading reports was not being interfered with by the webcam > visibility stream. > > The logs for weewx when this problem occurs usually indicates all > reports are generated and sent successfully so there is not a clue as > to where to find the fault and that is with debug set= 1 all the time. > > The streaming program log only fault indications are showing stream > drops a lot of frames and/or disconnects due to bandwidth restrictions > caused by my connection. When that occurs it usually only affects the > video stream as when it drops all latencies go back down to acceptable > so weewx is not affected by it. > > cheers > > > > > > On Tue, 2018-10-16 at 14:27 -0700, [email protected] wrote: > > Sirs, > > > > Thank you for your comments. I agree that I don't think it is a port > > problem. > > In answer to you questions/suggestions. I set debug=1 in weewx.conf > > before I sent my initial email. I tested the data logger with > > "screen". I entered TEST and the CR, it responded with TEXT. > > Indicating that weewx was talking to the data logger. I also took the > > batteries out of the data logger...to reset memory. > > > > I was worried that some how I installed thing improperly. So I > > removed everything (via synaptic) and deleted the DB in > > /var/lib/weewx. Changed the permission on my user account to > > administrator and reinstalled weewx. I restarted system. After a hour > > or so I checked the html files. They looked the same as before. The > > only data showing was barometer and inside temperature. Also the date > > shows as 10/05/2018 04:00:00 PM. Same as before. > > > > I am beginning to think my Davis Data Logger is not working right. I > > have included a more thorough log and copy of index.html. > > > > All suggestions are welcome. > > > > Regards, > > Dick > > > > On Monday, October 15, 2018 at 2:13:54 PM UTC-7, vince wrote: > > > On Monday, October 15, 2018 at 11:53:14 AM UTC-7, > > > [email protected] wrote: > > > > I have a Davis Vantage Pro 2 system. Originally on Windows 10 > > > > working no problem. I have thrown out Windows and did a clean > > > > install of Ubuntu 18.04 Mate. I installed weewx v3.8.2 per > > > > instructions from 'weeWX: Installation on Debian-base systems" > > > > i.e apt-get install weewx. I also installed Python 2.1.15. I set > > > > up weewx.conf for Davis Weatherlink Data Logger > > > > (6510USB)....'Vantge'. I used ttyUSB0. On starting system it > > > > generated html files but almost all the data is missing. I reset > > > > and cleaned out data on data logger (removed batteries etc.) I > > > > then restarted everything. Same problem on data. I tested to see > > > > if Ubuntu was looking at ttyUSB0. As far as I could tell it was > > > > talking to ttyUSB0. Ihave been trying things for about one week > > > > but am unable to see what is wrong. Any suggestions on what to > > > > try next is appreciated. > > > > > > > > > > > > > > > > > > There's basically nothing in the 'very' short log snippets you > > > posted that can help us. > > > > > > At a minimum, set debug=1 in weewx.conf and restart weewx. You > > > might want to compare /var/log/messages and /var/log/syslog > > > contents, it's possible you're not checking the right file for log > > > messages. > > > > > > You might also run "lsusb" to see what port your station is on, and > > > also verify that you have "port = /dev/ttyUSB0" in weewx.conf, and > > > not a bare 'ttyUSB0'. > > > > > > > -- > > You received this message because you are subscribed to the Google > > Groups "weewx-user" group. > > To unsubscribe from this group and stop receiving emails from it, > > send an email to [email protected]. > > For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
