Yeah I did, I read this passage and thought I could set it up:
Example: Acurite Bridge in sniff mode
1) The interceptor must be running on a computer that can see traffic from the
acurite bridge. For example, run weewx on a raspberry pi that has both a
wired network interface and a wifi network interface. Connect the acurite
bridge to the wired interface, and connect the rpi wireless to the local
wireless network.
2) Configure the interceptor
[Interceptor]
driver = user.interceptor
device_type = acurite-bridge
mode = sniff
iface = eth0
pcap_filter = src X.X.X.X and dst port 80
But it didn't work. I think I'm missing a step where I have to bridge the eth0
to the wifi, but all my attempts at that have failed. So before trying other
things, I was hoping someone had done it before and could point me in the right
direction.
On Sunday, October 21, 2018 at 9:17:24 AM UTC-4, rich T wrote:
>
> Ok...Did you look here:
>
> https://github.com/matthewwall/weewx-interceptor
>
>
> On Wednesday, October 17, 2018 at 10:39:49 AM UTC-4, Gabe wrote:
>
>> Trying to see if I can get the smarthub connected directly into the Pi
>> since I can't redirect DNS with Google Wifi (not enough advanced settings)
>>
>>
>>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
