Ok, I want to use it without a switch. Acurite smarthub into rPI's ethernet0, into wifi.
On Friday, October 19, 2018 at 9:40:55 PM UTC-4, rich T wrote: > > Correct I'm using a TL-SG105E managed switch that I had laying around > between the Smarthub and RPI3. I mirrored Port 1 to Port 2 on the switch. > The Smarthub is connected to Port 1 and the RPI3 is connected to Port 2. I > have no issues with this configuration. > > On Friday, October 19, 2018 at 9:05:46 AM UTC-4, Gabe wrote: >> >> Okay, but you're using a switch? The Smarthub is not directly connected >> into the RP3 ethernet jack? >> >> >> On Thursday, October 18, 2018 at 7:47:13 PM UTC-4, rich T wrote: >>> >>> Here is my configuration: >>> >>> Smarthub >(Port 1) Managed Switch (Port 2) > RP3 >>> >>> Port 2 is mirror of Port 1. And used the weewx-interceptor driver to >>> process the data. >>> >>> On Wednesday, October 17, 2018 at 10:39:49 AM UTC-4, Gabe wrote: >>> >>>> Trying to see if I can get the smarthub connected directly into the Pi >>>> since I can't redirect DNS with Google Wifi (not enough advanced settings) >>>> >>>> >>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
