Weather station is Oregon WMR300, log by weewx run directly access at http://weather.kozlovo.tk/jsondata/weatherlog.txt
пятница, 16 ноября 2018 г., 16:35:09 UTC+3 пользователь Andrew Milner написал: > > Saying type of weather station and giving log extract would help. Also > did you try Gary's suggestion and run weewx directly rather than as daemon > and compare the loop records with the data actually output?? > > > > On Friday, 16 November 2018 15:17:59 UTC+2, Vlad Mastenitsa wrote: >> >> And you can see that realtime.txt content different data than >> weaterflow.txt >> >> пятница, 16 ноября 2018 г., 16:15:02 UTC+3 пользователь Vlad Mastenitsa >> написал: >>> >>> yes. Sometime weexwx upload to realtime.txt correct data, and sometime >>> it content NULL's. for control it i have parallel upload to >>> http://weather.kozlovo.tk/jsondata/weatherflow.txt. >>> >>> Any ideas to help? >>> >>> p.s. About weewx.wxservices.StdWXCalculate i got it now. Thanks. >>> >>> пятница, 16 ноября 2018 г., 2:30:46 UTC+3 пользователь gjr80 написал: >>>> >>>> Hi, >>>> >>>> I am looking at your realtime.txt now (2:20am 16 November your time) >>>> and outTemp is showing as 0.7C and windSpeed is indeed Null which >>>> indicates that weeWX is not seeing a windSpeed value. Have you tried >>>> running >>>> weeWX directly <http://weewx.com/docs/usersguide.htm#Running_directly> >>>> and comparing the loop data windSpeed values against what you are >>>> seeing in realtime.txt? If they are both showing None/Null then I >>>> would look at your station console if you have one, does it show a wind >>>> speed value? This might point you to either the driver for your station or >>>> your station itself. >>>> >>>> I would do the same thing for outTemp, though like I said it is >>>> showing up fine for me just now. Perhaps you have some intermittent >>>> communications between your sensors and station? >>>> >>>> These issues will have nothing to do with >>>> weewx.wxservices.StdWXCalculate as outTemp and windSpeed are directly >>>> measured obs and not calculated by weeWX. >>>> >>>> Gary >>>> >>>> >>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
