I guess I am assuming you are using MQTT. I should ask, are you using MQTT for real time updates?
On Wednesday, December 5, 2018 at 8:50:10 AM UTC-5, Pat wrote: > > I will have to think about this one in a way that makes sense and doesn't > break anything. > > Since I show everything from MQTT exactly, I do not cache data when using > real time updating. > > > > On Wednesday, December 5, 2018 at 8:45:30 AM UTC-5, Juan Antonio Mosquera > wrote: >> >> attached image... >> >> [image: windNoData.JPG] >> thanks. >> >> El miércoles, 5 de diciembre de 2018, 14:37:00 (UTC+1), Pat escribió: >>> >>> I will have to see if I can do this since I show the data from MQTT >>> directly. >>> >>> When you do not have wind data, what does it show? >>> >>> >>> On Wednesday, December 5, 2018 at 4:21:57 AM UTC-5, Juan Antonio >>> Mosquera wrote: >>> >>> A suggestion. >>> >>> With the driver of the WMR300 it seems that there are times when it does >>> not send wind data. In this case it would be interesting if the template >>> always shows the last data so that wind direction and burst data always >>> appear, how do you see Pat? >>> >>> Greetings and thanks. >>> >>> El lunes, 3 de diciembre de 2018, 0:20:53 (UTC+1), Pat escribió: >>> >>> Some more thoughts on troubleshooting: >>> >>> 1) Is your error log the full output of the error section? >>> 2) Based on this comment in one of the GitHub issues >>> <https://github.com/poblabs/weewx-belchertown/issues/20#issuecomment-434405445>, >>> >>> if you open skins/Belchertown/skin.conf and change NONE = 0 (instead of >>> "N/A") in *[[StringFormats]]* >>> >>> ... >> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
