Patrick If you don't want to try to write a driver, another option might be:
Weather Station > Node Red > MQTT > Weewx 1. Your weather station interfaces Node Red via the Raspberry GPIOs. 2. Add the data to MQTT broker. (there is some programming that needs to done to get and add the data) 3. Using the Weewx MQTT extension, subscribe to broker. (there is some configuring that needs to be done) Rich On Saturday, December 8, 2018 at 11:58:47 AM UTC-5, Patrick Tranchant wrote: > > > On Saturday, December 8, 2018 at 5:19:28 PM UTC+1, Patrick Tranchant wrote: >> >> it's me again >> the communication between Weewx and my BYO weather station must be done >> with the GPIO of Raspberry >> I think you know it. >> >> Patrick >> >> On Saturday, December 8, 2018 at 3:40:43 PM UTC+1, Patrick Tranchant >> wrote: >>> >>> hello I am a newbie from France ( sorry for my english ) >>> >>> I want to use weewx on a raspberry with a weather station built by >>> myself (view on Magpi) >>> I don't see my station on your website to configure : >>> >>> Weather Station Hardware Comparison: I don't found my weather station. >>> Do you have a solution or how to configure Weewx >>> >>> thank you for your help >>> >>> Patrick >>> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
