thank you Rich I go to try to read your solution. thank patrick
Le sam. 8 déc. 2018 à 18:26, rich T <[email protected]> a écrit : > Patrick > > If you don't want to try to write a driver, another option might be: > > Weather Station > Node Red > MQTT > Weewx > > 1. Your weather station interfaces Node Red via the Raspberry GPIOs. > 2. Add the data to MQTT broker. (there is some programming that needs to > done to get and add the data) > 3. Using the Weewx MQTT extension, subscribe to broker. (there is > some configuring that needs to be done) > > Rich > > On Saturday, December 8, 2018 at 11:58:47 AM UTC-5, Patrick Tranchant > wrote: > >> >> >> On Saturday, December 8, 2018 at 5:19:28 PM UTC+1, Patrick Tranchant >> wrote: >>> >>> it's me again >>> the communication between Weewx and my BYO weather station must be done >>> with the GPIO of Raspberry >>> I think you know it. >>> >>> Patrick >>> >>> On Saturday, December 8, 2018 at 3:40:43 PM UTC+1, Patrick Tranchant >>> wrote: >>>> >>>> hello I am a newbie from France ( sorry for my english ) >>>> >>>> I want to use weewx on a raspberry with a weather station built by >>>> myself (view on Magpi) >>>> I don't see my station on your website to configure : >>>> >>>> Weather Station Hardware Comparison: I don't found my weather station. >>>> Do you have a solution or how to configure Weewx >>>> >>>> thank you for your help >>>> >>>> Patrick >>>> >>> -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
