Hello.
I am trying to make the weewx to work with *Eurochron EFWS2900*, which is
practically the same like *Fine Offset WH2900 / Ambient Weather WS-2902A. *
I am using intercept driver, but I dont know if I have set it up correctly.
The Webpage is not refreshing.
this is beginning of my weewx.conf file:
# This section is for information about the station.
[Station]
# Description of the station location
location = "Trencianske Jastrabie, Hlboka ulica, 320mnm"
# Latitude and longitude in decimal degrees
latitude = 48.801
longitude = 18.103
# Altitude of the station, with unit it is in. This is downloaded from
# from the station if the hardware supports it.
altitude = 320, meter
# Set to type of station hardware. There must be a corresponding stanza
# in this file with a 'driver' parameter indicating the driver to be
used.
station_type = Interceptor
# If you have a website, you may specify an URL
#station_url = http://www.example.com
# The start of the rain year (1=January; 10=October, etc.). This is
# downloaded from the station if the hardware supports it.
rain_year_start = 1
# Start of week (0=Monday, 6=Sunday)
week_start = 0
##############################################################################
[Interceptor]
# This section is for the network traffic interceptor driver.
# The driver to use:
driver = user.interceptor
# Specify the hardware device to capture. Options include:
# acurite-bridge - acurite internet bridge, smarthub, or access
# observer - fine offset WH2600/HP1000/HP1003, ambient WS2902
# lw30x - oregon scientific LW301/LW302
# lacrosse-bridge - lacrosse GW1000U/C84612 internet bridge
# wu-client - any hardware that uses the weather underground protocol
device_type = observer
mode = sniff
iface = wlan0
pcap_filter = src 192.168.1.151 and dst port 80
# port = 8080
# address = 192.168.1.151
##############################################################################
[Simulator]
# This section is for the weewx weather station simulator
# The time (in seconds) between LOOP packets.
loop_interval = 2.5
# The simulator mode can be either 'simulator' or 'generator'.
# Real-time simulator. Sleep between each LOOP packet.
mode = simulator
# Generator. Emit LOOP packets as fast as possible (useful for
testing).
#mode = generator
# The start time. Format is YYYY-mm-ddTHH:MM. If not specified, the
default
# is to use the present time.
#start = 2011-01-01T00:00
# The driver to use:
driver = weewx.drivers.simulator
What do I do wrong there?
Thank you,
Michal
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
