On Sunday, April 14, 2019 at 6:08:55 PM UTC-5, mwall wrote: > > DSL Router is address 192.168.254.254 >> >> Smart Hub is connected directly to the router using address 192.168.254.4 >> >> Raspberry Pi is connected to router via wifi using address 192.168.254.41 >> >> On the router I have DNS entries for hubcap.myacurite.com and >> www.acu-link.com both pointed to 192.168.254.41 >> > > excellent! > > what do you see when you open a web browser and enter the url > http://hubapi.myacurite.com or http://www.acu-link.com? > > you need to use port 80 for the interceptor, not port 8000. if you are > already running a web server on port 80 on the rpi, then you must either: > > option 1: set up a reverse proxy on the pi so that the existing web server > sends acurite requests to the interceptor on port 8000 > > OR > > option 2: run the web server on some other port, say 8080, and run the > interceptor on port 80 > > finally, the smarthub web page shows a firmware version of 224, not 126. > so you should remove the 'firmware_version=126' directive from the > interceptor configuration. > > btw, it is odd to see the old-style smarthub web page with a new (224) > firmware version. but my first-hand sample size with smarthubs is rather > small (5 or 6) so it is quite possible that there are combinations of boot > firmware or application firmware that result in the old-style web page. if > there are other smarthub users out there who could post a screen shot of > their smarthub web page, that would help us figure it out. > > m >
-- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
